Water Pump - Disassemble
Show/hide table
Alat yang Diperlukan | |||
Alat | Nomor Suku Cadang | Keterangan Suku Cadang | Jml |
A | 1U-9895 | Blok Silang | 1 |
1P-0820 | Alat Penarik Hidraulik | 1 | |
126-7181 | Pelat Geser | 2 | |
3H-0465 | Pelat Push-Puller | 6 | |
2S-4680 | Stud | 2 | |
3S-6224 | Group Pompa Hidraulik Elektrik | 1 | |
2L-4523 | Baut | 2 | |
5P-8244 | Ring Keras | 2 | |
6B-6682 | Mur Penuh | 2 | |
2J-3506 | Mur Penuh | 2 | |
B | 521-4900 | Rakitan Alat Penarik | 1 |
Dimulai dengan:
- Lepaskan pompa air.
- Lepaskan mur (1) dan stud dari rakitan penutup (2). Lepaskan rakitan penutup (2).
Show/hide table
Ilustrasi 2 g03475339 - Lepaskan seal O-ring (3) dan seal O-ring (4) dari rakitan penutup (2).
Show/hide table
Ilustrasi 3 g06133692 Show/hide tableCedera dapat terjadi akibat tertusuk oleh sukucadang yang dilontarkan oleh gaya pegas yang terlepas.
Pastikan untuk menggunakan semua peralatan pelindung yang diperlukan.
Ikuti prosedur yang direkomendasikan dan gunakan semua peralatan yang direkomendasikan untuk melepaskan gaya pegas.
- Gunakan Peralatan (A) untuk melepaskan impeller (5).
Show/hide table
Ilustrasi 4 g06133697 - Gunakan Peralatan (B) untuk melepaskan grup seal berputar (6).
Show/hide table
Ilustrasi 5 g06133750 - Lepaskan baut (7) dan ring dari ring dorong (8) dari rumah pompa (9).
Show/hide table
Ilustrasi 6 g06133752 - Lepaskan grup seal stasioner (11).
- Lepas rakitan sumbat (12) dari rumah pompa (10).
Show/hide table
Ilustrasi 7 g06133753 - Lepaskan seal bibir (13), rakitan ring (14), dan pin pengarah dari rumah pompa (10).
Show/hide table
Ilustrasi 8 g06133754 - Lepaskan filter (15) dari rumah pompa (10).
Show/hide table
Ilustrasi 1 | g03475023 |
Referensi: Rujuk ke Panduan Penggunaan dan Pemanfaatan Kembali, SEBF8418, "Salvage of Water Pumps in 3500 Series Engines" untuk panduan penggunaan dan pemanfaatan kembali .
Caterpillar Information System:
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Display Description
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators General Information
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Fuel System Primary Filter (Water Separator) Element - Replace
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Safety Messages
C15 and C18 Industrial Engines Solenoid Valve (ARD Main Fuel) - Remove and Install
C15 and C18 Industrial Engines Soot Sensor - Remove and Install
C15 and C18 Industrial Engines Soot Antenna - Remove and Install - Clean Emissions Module
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package ARD Spark Plug - Replace
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Belts - Inspect/Adjust/Replace
C15 and C18 Industrial Engines Pressure Sensor (ARD Combustion Air) - Remove and Install
C15 and C18 Industrial Engines Electronic Control (ARD Combustion Air) - Remove and Install
3512C Oil Well Service Engines Belts - Inspect/Adjust/Replace
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Assemble
584 and 584HD Forwarders Fire Safety
C27 and C32 Industrial Engines Flywheel - Remove and Install
C7.1 Industrial Engine Flow Control Valve - Remove and Install
C7.1 Industrial Engine Fuel Temperature Sensor - Remove and Install
Incorrectly Assembled 0R-8320 Cylinder Pack As from the Factory for 3406C Truck Engines{1225, 1239} Incorrectly Assembled 0R-8320 Cylinder Pack As from the Factory for 3406C Truck Engines{1225, 1239}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600} NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
2010/12/16 A New Throttle is Used on some G3516B Engines {1265}
C27 Petroleum Generator Set Engines Shutdown - Test
C27 and C32 Industrial Engines Engine Oil Cooler - Remove and Install
C27 Petroleum Generator Set Engines Diagnostic Trouble Codes
Preventing Cracks and Leaks in the Composite Valve Covers on Some C9 Engines{1107, 1120} Preventing Cracks and Leaks in the Composite Valve Covers on Some C9 Engines{1107, 1120}