Housing (Front) - Remove
拆卸步骤
开始:
- 拆下曲轴前油封。
- 拆下凸轮轴。
- 拆下螺栓 (1) ,然后拆下和发动机安装件 (2) 。
Show/hide table
图 1 | g01360127 |
- 拆下螺栓 (3) 和螺栓 (4) 。 拆下将油底壳的前部连接到前壳体上的螺栓 (5) 。
Show/hide table
图 2 | g02149190 |
- 拆下前壳体 (6) 。
Show/hide table
图 3 | g01360155 |
Caterpillar Information System:
2010/04/26 Fuel Injection Nozzles for 3056E Engines {1251, 1290}
3412E, C30 and C32 Marine Engines Heat Exchanger - Assemble - With Fuel Cooler
3412E, C30 and C32 Marine Engines Heat Exchanger - Disassemble - With Fuel Cooler
3512C Petroleum Engines Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C6.6 Industrial Engine Turbocharger
3512C Petroleum Engines Fuel Injector - Inspect/Adjust/Replace
SPF343 and SPF343C Trailer Mounted Pumpers Engine Valve Lash - Check
C27 and C32 Generator Sets Engine Mounts - Inspect
3512B HD SR500 Generator Sets Engine Air Precleaner - Check/Clean
C175-16 PETROLEUM ENGINES Water Temperature Control Valve - Remove - Separate Circuit Aftercooler (SCAC)
C18 Marine Engines Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C9.3 Engines for Caterpillar Built Machines Cylinder Block Cover - Remove and Install
C9.3 Engines for Caterpillar Built Machines Housing (Front) - Install
C27 Industrial Engine and C27 Locomotive Engine Engine Speed/Timing Sensor - Clean/Inspect
Replacement Procedure for Power Conductor Braids With New Silicone Cables{1408, 4460} Replacement Procedure for Power Conductor Braids With New Silicone Cables{1408, 4460}
C4.4 Industrial Engine Air Inlet and Exhaust System - Series Turbochargers
C4.4 Industrial Engine Cooling System
C4.4 Industrial Engine Basic Engine
Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070} Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070}
C4.4 Industrial Engine Lubrication System
C4.4 Industrial Engine Introduction
C4.4 Industrial Engine Fuel Injection
C4.4 Industrial Engine Power Sources
C4.4 Industrial Engine Electronic Control System