C6.6 Industrial Engine Caterpillar

Illustration 1	g02334286
Typical example

(1) Tighten the studs to the following torque. ... 18 N·m (13 lb ft)

(2) Tighten the nuts to the following torque. ... 44 N·m (32 lb ft)

(3) Tighten the bolt to the following torque. ... 15 N·m (11 lb ft)

(4) Tighten the studs to the following torque. ... 18 N·m (13 lb ft)

(5) Tighten the nuts to the following torque. ... 44 N·m (32 lb ft)

(6) Tighten the band clamps to the following torque. ... 12 N·m (106 lb in)

(7) Actuator

The test pressure for the wastegate actuator ... 100 kPa (14.5 psi)

The movement for the rod actuator ... 1 mm (0.0394 inch)

Illustration 2	g02334338
Typical example

(8) Tighten the bolts to the following torque. ... 9 N·m (80 lb in)

(9) Tighten the bolt to the following torque. ... 33 N·m (24 lb ft)

(10) Tighten the bolt to the following torque. ... 22 N·m (16 lb ft)