Fuel Injector - Inspect/Adjust/Replace
Show/hide table
进行此一保养时,要确保发动机不会被起动。 不要使用起动马达来旋转飞轮,以免造成人身伤害。 热的发动机零部件可能造成烫伤。 在测量/调整单体喷油器前要等一定时间,让发动机冷下来。 电子单体喷油器采用高电压。 断开单体喷油器的电路接头以防止人身损伤。 发动机运转时,不要接触喷油器接线端。 |
在电子单体喷油器调整不当的情况下运行 Caterpillar 发动机可能降低发动机的效率。 这种效率降低将导致燃油用量过大和/或发动机部件寿命缩短。
只有具有资质的维修人员才能执行此项保养。 请参阅下述主题中有关发动机的正确步骤:请参阅系统操作、测试和调整, "电子单体喷油器 - 测试"中的测试步骤,以及系统操作、测试和调整, "电子单体喷油器 - 调整"中调整喷油器的正确步骤。 请参阅拆解和组装, RENR 9365, "电子单体喷油器 - 拆卸"以及拆解和组装, RENR 9365, "电子单体喷油器 - 安装"中更换单体喷油器的步骤。
Show/hide table
注意 |
---|
在对燃油喷油器进行间隙调整之前,凸轮轴相对于曲轴的正时必须调整正确。 旋转曲轴之前,正时销必须从凸轮轴上取下来,否则将会对缸体造成损坏。 |
Caterpillar Information System:
SPF343 and SPF343C Trailer Mounted Pumpers Engine Valve Lash - Check
C27 and C32 Generator Sets Engine Mounts - Inspect
3512B HD SR500 Generator Sets Engine Air Precleaner - Check/Clean
C175-16 PETROLEUM ENGINES Water Temperature Control Valve - Remove - Separate Circuit Aftercooler (SCAC)
C18 Marine Engines Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C9.3 Engines for Caterpillar Built Machines Cylinder Block Cover - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Electronic Modular Control Panel 3 (EMCP 3)
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Air Inlet Filter - Inspect/Clean/Test
349F and 352F Excavators Hydraulic System Pump Control (Output Flow) - Adjust
C4.4 Industrial Engine Engine Valve Lash - Inspect
C7.1 Industrial Engine ARD Spark Plug - Clean/Inspect/Replace
C4.4 Industrial Engine Engine Oil Cooler - Inspect
C6.6 Industrial Engine Turbocharger
3512C Petroleum Engines Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
3412E, C30 and C32 Marine Engines Heat Exchanger - Disassemble - With Fuel Cooler
3412E, C30 and C32 Marine Engines Heat Exchanger - Assemble - With Fuel Cooler
2010/04/26 Fuel Injection Nozzles for 3056E Engines {1251, 1290}
C9.3 Engines for Caterpillar Built Machines Housing (Front) - Remove
C9.3 Engines for Caterpillar Built Machines Housing (Front) - Install
C27 Industrial Engine and C27 Locomotive Engine Engine Speed/Timing Sensor - Clean/Inspect
Replacement Procedure for Power Conductor Braids With New Silicone Cables{1408, 4460} Replacement Procedure for Power Conductor Braids With New Silicone Cables{1408, 4460}
C4.4 Industrial Engine Air Inlet and Exhaust System - Series Turbochargers
C4.4 Industrial Engine Cooling System
C4.4 Industrial Engine Basic Engine