Engine Oil Cooler - Inspect
Show/hide table
热油和热的部件可能会导致人员受伤。 不要让热的油和部件接触皮肤。 |
Show/hide table
图 1 | g02148936 |
典型示例 |
执行下述步骤以检查发动机机油冷却器。
- 在机油冷却器下面放一个容器来收集从机油冷却器排出的所有发动机机油或冷却液。
- 有关发动机机油冷却器的拆卸步骤,请参阅拆解和组装, "发动机机油冷却器 - 拆卸"。
- 彻底清洁机油冷却器 (1) 和缸体。
Show/hide table
空气压力会造成人身伤害。
不按下面的步骤进行操作会造成人身伤害。 使用压缩空气时,戴防护面罩及穿防护服。
用作清洗用途时,喷嘴处最大空气压力必须低于
205 kPa (30 psi) 。 - 检查机油冷却器 (1) 有无裂纹和凹痕。 如果存在裂纹或凹痕,则更换机油冷却器 (1)。 确保机油冷却器 (1) 中润滑油流没有阻塞。
使用低压空气吹干机油冷却器 (1)。 用清洁的润滑油冲洗机油冷却器 (1) 内部。
- 有关发动机机油冷却器的安装步骤,请参阅拆解和组装, "发动机机油冷却器 - 安装"。
- 确保发动机的润滑和冷却系统加注到正确液位。 运转发动机。
注: 更多信息,请参考操作和保养手册, "加注容量"。
检查有无机油或冷却液泄漏。
Caterpillar Information System:
C4.4 Industrial Engine Cylinder Head - Inspect
C27 and C32 Tier 4 Engines Configuration Parameters
C4.4 Industrial Engine Engine Design
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Starting the Engine
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Manual Stop Procedure
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Plate Locations and Film Locations
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Product Lifting
C27 and C32 Engines for Caterpillar Built Machines Turbocharger - Inspect
C9.3 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C7.1 Industrial Engine Fuel System Secondary Filter - Replace
C175-16 Locomotive Engine Lifter Group
C4.4 Industrial Engine Exhaust Sensor and Lines (NRS)
C7.1 Industrial Engine ARD Spark Plug - Clean/Inspect/Replace
C4.4 Industrial Engine Engine Valve Lash - Inspect
349F and 352F Excavators Hydraulic System Pump Control (Output Flow) - Adjust
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Air Inlet Filter - Inspect/Clean/Test
3508B, 3512B, and 3516B High Displacement Generator Sets Electronic Modular Control Panel 3 (EMCP 3)
C9.3 Engines for Caterpillar Built Machines Cylinder Block Cover - Remove and Install
C18 Marine Engines Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C175-16 PETROLEUM ENGINES Water Temperature Control Valve - Remove - Separate Circuit Aftercooler (SCAC)
3512B HD SR500 Generator Sets Engine Air Precleaner - Check/Clean
C27 and C32 Generator Sets Engine Mounts - Inspect
SPF343 and SPF343C Trailer Mounted Pumpers Engine Valve Lash - Check
3512C Petroleum Engines Fuel Injector - Inspect/Adjust/Replace