Exhaust Sensor and Lines (NRS)
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | QTY |
A | - | Bostik Pure Nickel Anti-Seize Compound |
1 |
Show/hide table
Illustration 1 | g02148954 |
Typical example |
Note: Apply Tooling (A) to the sensors before the sensors are installed.
(1) Tighten the sensors to the following torque. ...
Tighten the harness for the sensors (not shown) to the following torque. ...
Caterpillar Information System:
C175-16 PETROLEUM ENGINES Air Shutoff - Remove and Install
C4.4 Industrial Engine Air Compressor - Single Cylinder
C4.4 Industrial Engine Air Compressor - Twin Cylinder Compressor
525D, 535D, 545D, 555D Wheel Skidder Fuel System Primary Filter (Water Separator) Element - Replace
C4.4 Industrial Engine Accessory Drive - SAE "B"
C4.4 Industrial Engine Accessory Drive
C7.1 Industrial Engine Fuel System Primary Filter/Water Separator - Drain
C9.3 Engines for Caterpillar Built Machines Pressure Sensor (ARD Combustion Air) - Remove and Install
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785} 348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
317-7492 Wireless Radio{7338} 317-7492 Wireless Radio{7338}
C27 and C32 Tier 4 Engines Component Location
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
C175-16 Locomotive Engine Lifter Group
C7.1 Industrial Engine Fuel System Secondary Filter - Replace
C9.3 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Turbocharger - Inspect
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Product Lifting
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Plate Locations and Film Locations
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Manual Stop Procedure
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Starting the Engine
C4.4 Industrial Engine Engine Design
C27 and C32 Tier 4 Engines Configuration Parameters
C4.4 Industrial Engine Cylinder Head - Inspect
C4.4 Industrial Engine Engine Oil Cooler - Inspect