Inlet and Exhaust Valve Seat Inserts - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A.     | 9S-3095     | 拉拔器手柄     | 1     |
B     | 6V-4194 (1)     |
气门座拔取器     | 1     |
1U-9167 (1) |
气门座拔取器     | 1     |
Show/hide table
( 1 ) | 结合排气门座使用 |
( 1 ) | 结合进气门座使用 |
开始:
- 拆下进气门和排气门。 请参阅拆解和组装, "进气门和排气门 - 拆卸和安装"。
- 使用工具 (A) 和工具 (B) ,拆下气门座镶圈 (1) 。
Show/hide table
图 1 | g01137634 |
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
C     | 4C-6372 (1)     | 气门座冲头     | 1     |
364-4009 (1) | 气门座冲头     | 1     |
Show/hide table
( 1 ) | 结合排气门座使用 |
( 1 ) | 结合进气门座使用 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 降低新气门座镶圈 (1) 的温度。 使用工具 (C) ,在缸盖中安装气门座镶圈 (1) 。
Show/hide table
图 2 | g01137637 |
注: 不要为了纠正气门杆突出而加工已经加工好的气门座镶圈。 气门杆突出说明气门座镶圈没有安装到位或镗孔底部残渣未清理干净。
End By: 安装进气门和排气门。 请参阅 拆解和组装, "进气门和排气门 - 拆卸和安装"。
Caterpillar Information System:
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fuel System Primary Filter (Water Separator) Element - Replace
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fuel System Secondary Filter - Replace
C11, C13, C15, and C18 Industrial Engines Engine Overcrank Occurrence
797F and 797 XQ Off-Highway Trucks Engine Supplement Refrigerant Condenser - Remove and Install
349F and 352F Excavators Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
2010/04/15 A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Truck Engines {1261, 1274, 5067}
2010/04/16 A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Commercial Engines {1261, 1274, 5067}
C4.4 (Mech) Marine Generator Set MCS-3 Belts - Inspect/Adjust/Replace - Single Belt
2010/04/15 A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Machine Engines {1261, 1274, 5067}
C4.4 (Mech) Marine Generator Set MCS-3 Battery or Battery Cable - Disconnect
C4.4 (Mech) Marine Generator Set MCS-3 Battery Electrolyte Level - Check
C4.4 (Mech) Marine Generator Set MCS-3 Battery Charger - Check
C4.4 (Mech) Marine Generator Set MCS-3 Reference Information
C4.4 (Mech) Marine Generator Set MCS-3 Product Installation
C4.4 (Mech) Marine Generator Set MCS-3 Product Lifting
C4.4 (Mech) Marine Generator Set MCS-3 Coolant (ELC) - Change
C7.1 Marine Generator Set Coolant Extender (ELC) - Add
C4.4 (Mech) Marine Generator Set MCS-3 Coolant Level - Check
C4.4 (Mech) Marine Generator Set MCS-3 Coolant Sample (Level 1) - Obtain
C4.4 (Mech) Marine Generator Set MCS-3 Coolant Sample (Level 2) - Obtain
C4.4 (Mech) Marine Generator Set MCS-3 Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C4.4 (Mech) Marine Generator Set MCS-3 Coolant Temperature Regulator - Replace
C4.4 (Mech) Marine Generator Set MCS-3 Engine - Clean
C4.4 (Mech) Marine Generator Set MCS-3 Water Pump - Inspect