A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Commercial Engines {1261, 1274, 5067}
- Engine:
- C-10 (S/N: BCX1-UP)
- Generator Set:
- C15 (S/N: C5E1-UP; STG1-UP; C5H1-UP; C5L1-UP; X4R1-UP)
- Industrial Engine:
- C-15 (S/N: BEM1-UP)
- Marine Engine:
- C-12 (S/N: 9HP1-UP)
- Petroleum Engine:
- C-15 (S/N: Z2C1-UP)
- Petroleum Power Train Package:
- TH35-C15I (S/N: PBN1-UP)
- C-12 (S/N: BDL1-UP)
- C18 (S/N: EJG1-UP)
- C4.4 (S/N: 4441-UP)
- C18 (S/N: C6C1-UP; G4C1-UP; STD1-UP; STM1-UP; EKW1-UP)
- C18 (S/N: CYN1-UP; MGS1-UP)
- C-16 (S/N: BFM1-UP)
- C11 (S/N: GLS1-UP)
- C13 (S/N: LGK1-UP)
- C15 (S/N: JRE1-UP)
- C15 (S/N: JAS1-UP)
- C18 (S/N: WJH1-UP)
- C27 (S/N: TWM1-UP)
- C32 (S/N: TLD1-UP)
- C9 (S/N: JSC1-UP; MBD1-UP)
- C12 (S/N: NFL1-UP; C1Z1-UP)
- C15 (S/N: RLA1-UP)
- C18 (S/N: WKB1-UP; PLE1-UP; CKH1-UP; C1J1-UP; KJT1-UP)
- C18 (S/N: J2K1-UP; T2P1-UP)
- C32 (S/N: RXB1-UP; RNC1-UP; SLT1-UP; T3T1-UP)
A new torque is used when installing the check valve group into the secondary fuel filter base on the serial numbers that are listed above.
Show/hide table
Illustration 1 | g02145586 |
(1) Torque for the check valve group ... 28 N·m (21 lb ft)
Caterpillar Information System:
C4.4 (Mech) Marine Generator Set MCS-3 Belts - Inspect/Adjust/Replace - Single Belt
2010/04/15 A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Machine Engines {1261, 1274, 5067}
C4.4 (Mech) Marine Generator Set MCS-3 Battery or Battery Cable - Disconnect
C4.4 (Mech) Marine Generator Set MCS-3 Battery Electrolyte Level - Check
C4.4 (Mech) Marine Generator Set MCS-3 Battery Charger - Check
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Engine Rating Definitions
C4.4 (Mech) Marine Generator Set MCS-3 Battery - Replace
C4.4 (Mech) Marine Generator Set MCS-3 Auxiliary Water Pump - Inspect
C4.4 (Mech) Marine Generator Set MCS-3 Automatic Start/Stop - Inspect
C4.4 (Mech) Marine Generator Set MCS-3 Alternator - Inspect
Replacement of Horn On Certain EMCP 3 Control Panels On Certain Generator Sets{4490, 7402} Replacement of Horn On Certain EMCP 3 Control Panels On Certain Generator Sets{4490, 7402}
C4.4 (Mech) Marine Generator Set MCS-3 Diagnostic Lamp
2010/04/15 A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Truck Engines {1261, 1274, 5067}
349F and 352F Excavators Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
797F and 797 XQ Off-Highway Trucks Engine Supplement Refrigerant Condenser - Remove and Install
C11, C13, C15, and C18 Industrial Engines Engine Overcrank Occurrence
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fuel System Secondary Filter - Replace
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fuel System Primary Filter (Water Separator) Element - Replace
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C4.4 (Mech) Marine Generator Set MCS-3 Reference Information
C4.4 (Mech) Marine Generator Set MCS-3 Product Installation
C4.4 (Mech) Marine Generator Set MCS-3 Product Lifting
C4.4 (Mech) Marine Generator Set MCS-3 Coolant (ELC) - Change
C7.1 Marine Generator Set Coolant Extender (ELC) - Add