797F and 797 XQ Off-Highway Trucks Engine Supplement Caterpillar


Refrigerant Condenser - Remove and Install

Usage:

797F LAJ

Removal Procedure

Start By:

  1. If equipped, remove the front grill.

------ WARNING! ------

Personal injury can result from contact with refrigerant.

Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.

Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.

Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.

Personal injury or death can result from inhaling refrigerant through a lit cigarette.

Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.

Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.

Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.


  1. Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant". Refer to Special Publication, NEDG2500, "Air Conditioning Tools" for the correct procedure.


    Illustration 1g02145481

  2. Remove grill (1).


    Illustration 2g02145489

  3. Disconnect hose assembly (2) and hose assembly (3). Remove bolts (4). Remove refrigerant condenser (5).

Installation Procedure

  1. Install refrigerant condenser (5) in the reverse order of removal.

Caterpillar Information System:

349F and 352F Excavators Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
2010/04/15 A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Truck Engines {1261, 1274, 5067}
2010/04/16 A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Commercial Engines {1261, 1274, 5067}
C4.4 (Mech) Marine Generator Set MCS-3 Belts - Inspect/Adjust/Replace - Single Belt
2010/04/15 A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Machine Engines {1261, 1274, 5067}
C4.4 (Mech) Marine Generator Set MCS-3 Battery or Battery Cable - Disconnect
C4.4 (Mech) Marine Generator Set MCS-3 Battery Electrolyte Level - Check
C4.4 (Mech) Marine Generator Set MCS-3 Battery Charger - Check
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Engine Rating Definitions
C4.4 (Mech) Marine Generator Set MCS-3 Battery - Replace
C4.4 (Mech) Marine Generator Set MCS-3 Auxiliary Water Pump - Inspect
C4.4 (Mech) Marine Generator Set MCS-3 Automatic Start/Stop - Inspect
C11, C13, C15, and C18 Industrial Engines Engine Overcrank Occurrence
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fuel System Secondary Filter - Replace
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fuel System Primary Filter (Water Separator) Element - Replace
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C4.4 (Mech) Marine Generator Set MCS-3 Reference Information
C4.4 (Mech) Marine Generator Set MCS-3 Product Installation
C4.4 (Mech) Marine Generator Set MCS-3 Product Lifting
C4.4 (Mech) Marine Generator Set MCS-3 Coolant (ELC) - Change
C7.1 Marine Generator Set Coolant Extender (ELC) - Add
C4.4 (Mech) Marine Generator Set MCS-3 Coolant Level - Check
C4.4 (Mech) Marine Generator Set MCS-3 Coolant Sample (Level 1) - Obtain
C4.4 (Mech) Marine Generator Set MCS-3 Coolant Sample (Level 2) - Obtain
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.