1989/07/24 Caterpillar


Stronger Spacer Plate Prevents Cracking{1221,1350}

Usage:


3500 Family Of Engines

Description of Change: A stronger spacer plate is used under the cylinder heads on the 3500 Family of Engines. The new plate is wider at the front and rear sides around the water seal holes. This makes the plate stronger in these two areas. The new plates are identified by the part number "9Y1485" on the plate.

A new gasket that is also wider at the same locations is used with the new spacer plate.

Adaptable To: The new 9Y1485 Spacer Plate can be used as a direct replacement for the former 8N6864 Spacer Plate which is canceled. The new 9Y1484 Gasket is a direct replacement for the former 9Y2683 Gasket or 7N2038 Gasket, which are both canceled. New and former plates and gaskets can be used together.

The 9Y1484 and 9Y2683 Gaskets have a sealant coating around the hole for the pushrod compartment. The side with the sealant coating goes next to the block.

Caterpillar Information System:

1989/07/24 Engine Oil Coolers With New Rubber End Sheet Available For Parts Service{1378}
1989/07/24 Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay){1426,1450}
1989/07/24 Separate Grounding Of Throttle Limit Switch And Shutoff Solenoid Improves Component Reliability; New Throttle Limit Switch Used{1269,1155,1400}
1989/07/24 Subscription Service Available For ECAP And DDT Service Program Modules{0782,1705}
1989/07/24 Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24 New Publication Available, "Ultrasonics Guide"{0374}
1989/07/24 New Publication Available, "Metal Spray Guide"{0374}
1989/07/17 PEEC Training And Diagnostic Training Program Available{0314,0372,1705}
1989/07/10 New, Larger Vibration Damper Improves Wear Life{1205}
1989/07/10 New Viton Rubber Seals Used{1302,1307,1312,1306,1317,1200}
1989/07/03 Use Same Torque For All Sizes Of Threaded Crown Hydraulic Cylinders{5100,7562}
1989/07/03 Air Conditioning Service Tooling{0757,0786,7320}
1989/07/24 Improved Control Rod Assembly Used In Fuel Injection Control Groups{1298}
1989/07/24 New Cylinder Head Gasket Kit Available{1101,1216}
1989/08/07 Replacement Parts For Magnetos Discontinued On Gasoline Starting Engines {1530,1500}
1989/08/07 Pedal-Mounted Throttle Sensor Requires New Personality Module {1265,1705,1707}
1989/08/07 Improvements To Attachment Altronic® Ignition Systems {1550,1555,1558,1567}
1989/08/07 Temperature Sensor Pocket Kit Available For Danfoss® Temperature Contactors {1350,7403}
1989/08/07 Do Not Reuse Clutch Housing Bolts {3360,3305,3306}
1989/08/14 Worldwide Service Directories Available For Marine, Petroleum, Power Generation Products{0354,0370,0374,0375,1022,4450}
1989/08/14 New Coolant Conditioner Elements Available{1352}
1989/08/14 New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14 New Watercooled Exhaust Manifolds{1059}
1989/08/21 Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.