Turbocharger
Show/hide table
Illustration 1 | g02074235 |
Front view of engine |
Show/hide table
Illustration 2 | g02074236 |
Right side view of engine |
Show/hide table
Specification for 310-1658 Turbocharger Gp | |||
Item | Qty | Part | Specification description |
1 | 16 | 2N-2765 High Temperature Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads and the face of the washers. |
2 | 4 | 306-1720 Band Clamp | Use the following procedure to tighten the band clamp:
1. Tighten to 2. Lightly tap around the band clamp. 3. Again, tighten to |
Show/hide table
Illustration 3 | g02305095 |
332-7157 Turbocharger Gp |
Show/hide table
Specification for 310-1658 Turbocharger Gp | |||
Item | Qty | Part | Specification description |
3 | 4 | 332-7160 Housing | Torque to |
4 | 8 | 188-8617 High Temperature Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads. |
Torque to |
|||
5 | 8 | 125-5375 Bolt | Torque to |
6 | 4 | 287-7212 Compressor Housing | Torque to |
Caterpillar Information System:
C175-16 Engine for Off-Highway Trucks Engine Trunnion
3508C, 3512C and 3516C Locomotive Engines Water Lines
C13, C15, and C18 Tier 4 Interim Engines Diesel Particulate Filter Has Low Inlet Pressure
2010/01/18 New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
C27 Generator Set Engines Connecting Rod Bearings - Inspect
2010/03/02 A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on Certain Engines {1124, 1201, 7555}
2010/01/27 A New Flange Nut Is Now Used In the Glow Plug Group on Certain Generator Sets {1412, 7553}
C175-16 Engine for Off-Highway Trucks Engine Oil Pump
3508C, 3512C and 3516C Locomotive Engines Air Inlet and Exhaust Lines
C6.6 Marine Generator Set Diagnostic Code Cross Reference
3508C, 3512C and 3516C Locomotive Engines Exhaust Manifold
C6.6 Marine Generator Set Intermittent Engine Shutdown
3500 Engines Water Connection Group
C175-16 Locomotive Engine Exhaust Manifold
793F Off-Highway Truck Machine Systems Window Wiper Motor - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Air Shutoff - Test
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Base
C13, C15, and C18 Tier 4 Interim Engines Cooling Fan Control - Test
C6.6 Marine Generator Set CID 1690 FMI 08
C6.6 Marine Generator Set CID 1779 FMI 08
3524B and C175 Engines for Off-Highway Truck/Tractors Accessory Drive - Air and refrigerant compressor
C27 and C32 Tier 4 Engines Electronic Unit Injector Mechanism
C6.6 Marine Generator Set E085 Engine Shutdown Overridden
C27 Generator Set Engines Camshaft