C175-16 Engine for Off-Highway Trucks Caterpillar


Engine Oil Pump

Usage:

793F D3T



图 1g02073193



图 2g01462967



图 3g01463127

(A) 驱动轴末端到齿轮表面的距离 ... 91.4 ± 0.05 mm (3.60 ± 0.002 in)

(B) 齿轮的尺寸

新齿轮长度 ... 150.415 ± 0.013 mm (5.9218 ± 0.0005 in)
新齿轮的孔深度 ... 150.555 ± 0.020 mm (5.9273 ± 0.0008 in)

(C) 轴的尺寸

轴直径 ... 50.793 ± 0.005 mm (1.9997 ± 0.0002 in)
组装后轴的套筒轴承中的孔径 ... 50.918 ± 0.040 mm (2.0046 ± 0.0016 in)

注: 安装后不要机加工套筒轴承。

(D) 定位销从机油泵盖伸出 ... 8.0 ± 0.5 mm (0.31 ± 0.02 in)

(E) 套筒轴承在机油泵盖内的安装深度 ... 1.5 ± 0.5 mm (0.06 ± 0.02 in)

(F) 套筒轴承在机油泵体内的安装深度 ... 1.50 ± 0.25 mm (0.059 ± 0.010 in)

(G) 轴末端到齿轮表面的距离 ... 41.5 ± 0.5 mm (1.63 ± 0.02 in)

(H) 根据泵盖轴承孔中心线定位轴承接头。 ... 30 度

(J) 根据机油泵体轴承孔中心线定位轴承接头。 ... 30 ± 15 度

工作台测试技术参数

2394 rpm 时机油泵不受限的每分钟标称流量 ... 1542 L (405 US gal)

注: 安装发动机机油泵前,用清洁的发动机机油润滑机油泵的活动零件。 用手旋转机油泵以确保机油泵能够旋转自如。

Caterpillar Information System:

3508C, 3512C and 3516C Locomotive Engines Air Inlet and Exhaust Lines
C6.6 Marine Generator Set Diagnostic Code Cross Reference
3508C, 3512C and 3516C Locomotive Engines Exhaust Manifold
C6.6 Marine Generator Set Intermittent Engine Shutdown
C7 and C9 On-Highway Engines Air Inlet Heater - Test
2010/01/13 Correct Usage of Seals and Spacers on the Valve Mechanism Covers of Some C9 Engines {1107, 7555}
2010/01/14 Electronic Control Module on C6.6 and C4.4 Engines {1251, 1290}
2010/02/25 Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
C6.6 Generator Set System Configuration Parameters
2010/01/25 A New Instruction for the Improved Monitoring of Low Coolant Temperature (LCT) is Now Available on Certain C3.3 and C3.4 Products {4490, 7420}
C6.6 Marine Generator Set Injector Trim File
C175-16 Locomotive Engine Camshaft
2010/01/27 A New Flange Nut Is Now Used In the Glow Plug Group on Certain Generator Sets {1412, 7553}
2010/03/02 A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on Certain Engines {1124, 1201, 7555}
C27 Generator Set Engines Connecting Rod Bearings - Inspect
2010/01/18 New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
C13, C15, and C18 Tier 4 Interim Engines Diesel Particulate Filter Has Low Inlet Pressure
3508C, 3512C and 3516C Locomotive Engines Water Lines
C175-16 Engine for Off-Highway Trucks Engine Trunnion
3508C, 3512C and 3516C Locomotive Engines Turbocharger
3500 Engines Water Connection Group
C175-16 Locomotive Engine Exhaust Manifold
793F Off-Highway Truck Machine Systems Window Wiper Motor - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Air Shutoff - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.