MID 027 - CID 1227 - FMI 13
产生此代码的情况:
当 ECM 确定缓速器操纵杆的位置传感器需要标定时，记录此诊断代码。 该诊断代码只会在更换了 ECM 或已将新软件闪存到 ECM 中时显示。
测试步骤 1. 标定传感器。
- 执行传感器的标定步骤。 有关更多信息，请参阅测试和调整, "变速箱 - 标定"步骤。
预期结果:
成功执行标定步骤。
结果:
- 是 - 传感器标定步骤执行成功。 使机器恢复正常运转。
停止
- 否 - 传感器标定步骤执行不成功。
修复: 重新执行传感器的标定步骤。 有关更多信息，请参阅测试和调整, "变速箱 - 标定"步骤。
停止
Caterpillar Information System:
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 1227 - FMI 08
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 1227 - FMI 02
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0191 - FMI 02
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System Determining Diagnostic Codes
Exhaust Leaks on C175 Generator Sets with the 290-1620 Exhaust Adapter and the 289-9969 Exhaust Adapter {1061} Exhaust Leaks on C175 Generator Sets with the 290-1620 Exhaust Adapter and the 289-9969 Exhaust Adapter {1061}
793F Off-Highway Truck Engine Supplement Engine and Torque Converter - Remove and Install
2009/11/02 A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
3508, 3512 and 3516 Generator Set Engines Vibration Damper - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Fuel Temperature Is High
3508C, 3512C, and 3516C Locomotive Engines System Overview
3508, 3512 and 3516 Generator Set Engines Engine Oil and Water Pump Drive - Assemble
G3304B and G3306B Engines Engine Governing - Adjust
C32 Marine Auxiliary Engine Engine Air Cleaner Element - Clean/Replace - Heavy-Duty Air Cleaner Element
3508, 3512 and 3516 Generator Set Engines Crankshaft Front Seal and Wear Sleeve - Remove and Install
G3304B and G3306B Engines Throttle Actuator - Test
3508, 3512 and 3516 Generator Set Engines Crankshaft Rear Seal and Wear Sleeve - Remove and Install
3508C, 3512C and 3516C Locomotive Engines Engine Oil Lines
3508C, 3512C and 3516C Locomotive Engines Turbocharger Oil Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
2009/12/16 New Oil Level Gauges Are Used on Some 3516B Locomotive Engines {1326}
CX31-P600 Petroleum Transmission Transmission Oil Supply
C32 Auxiliary Engine Oil Cooler Core - Check/Clean/Test
C32 Marine Auxiliary Engine Overhaul (Top End)
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230} Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}