Engine Oil Lines
Show/hide table
| |
| Illustration 1 | g02849463 |
|
Right side view | |
Show/hide table
| Specification for 337-0068 Engine Oil Lines Gp, and 301-4081 Engine Oil Lines Gp | |||
| Item | Qty | Part | Specification Description |
| 3 | 1 | 240-1919 Tube As | Use the following procedure to tighten the clamp assembly to the tube assembly:
1. Snugly tighten the clamp assembly (2) to the tube assembly (3). 2. Tighten two bolts (1) of the clamp assembly to the tube assembly (3) to 3. Tighten two bolts (5) of the clamp assembly to the tube assembly to |
| 7 | 1 | 244-5867 Elbow | Use the following procedure to tighten the clamp assembly to the elbow:
1. Tighten two bolts (1) of the clamp assembly to the elbow (7) to 1. Tighten two bolts (5) of the clamp assembly to the elbow (7) to |
| 4 | 4 | 109-2332 O-Ring Seal | Lubricate the bore lightly with the fluid that is being sealed. |
Show/hide table
| |
| Illustration 2 | g02849464 |
|
Top view | |
Show/hide table
| |
| Illustration 3 | g02849465 |
|
View of area A with elbow removed | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 7 | 1 | 2W-1053 Plug | Torque to |
| 8 | 2 | 237-7623 O-Ring Seal | Lubricate the bore lightly with the fluid that is being sealed. |
Caterpillar Information System:
3508, 3512 and 3516 Generator Set Engines Crankshaft Rear Seal and Wear Sleeve - Remove and Install
G3304B and G3306B Engines Throttle Actuator - Test
3508, 3512 and 3516 Generator Set Engines Crankshaft Front Seal and Wear Sleeve - Remove and Install
C32 Marine Auxiliary Engine Engine Air Cleaner Element - Clean/Replace - Heavy-Duty Air Cleaner Element
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 1227 - FMI 13
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 1227 - FMI 08
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 1227 - FMI 02
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0191 - FMI 02
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System Determining Diagnostic Codes
Exhaust Leaks on C175 Generator Sets with the 290-1620 Exhaust Adapter and the 289-9969 Exhaust Adapter {1061} Exhaust Leaks on C175 Generator Sets with the 290-1620 Exhaust Adapter and the 289-9969 Exhaust Adapter {1061}
793F Off-Highway Truck Engine Supplement Engine and Torque Converter - Remove and Install
2009/11/02 A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
3508C, 3512C and 3516C Locomotive Engines Turbocharger Oil Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
2009/12/16 New Oil Level Gauges Are Used on Some 3516B Locomotive Engines {1326}
CX31-P600 Petroleum Transmission Transmission Oil Supply
C32 Auxiliary Engine Oil Cooler Core - Check/Clean/Test
C32 Marine Auxiliary Engine Overhaul (Top End)
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230} Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
3508, 3512 and 3516 Generator Set Engines Front Drive Housing - Remove and Install
320E and 323E Excavators Hydraulic System Oil Sample - Obtain
G3500B Engines Ignition System
C32 Marine Auxiliary Engine Maintenance Recommendations
CX31-P600 Petroleum Transmission Relief Valve (Transmission Hydraulic Control) - Test and Adjust