Engine Oil and Water Pump Drive - Disassemble
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-0520 | Driver Group | 1 |
Start By:
- Remove the engine oil and water pump drive.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove O-ring seal (4).
- Remove the bolts and thrust washers (2). Remove rear adapter assembly (3) from shaft assembly (1).
Show/hide table
Illustration 2 g00921559 - Remove O-ring seals (6) and (7) from rear adapter assembly (3).
- Use Tooling (A) and a suitable press to remove bearing (5).
Show/hide table
Illustration 3 g00921574 - Remove bolts (9) from shaft assembly (1). Remove gears (8) and (10) from shaft assembly (1).
Show/hide table
Illustration 4 g00921575 - Remove O-ring seal (13) from front adapter assembly (12).
- Use Tooling (A) and a suitable press to remove bearing (11) from front adapter assembly (12).
Show/hide table
| |
| Illustration 1 | g01052078 |
Caterpillar Information System:
3508, 3512 and 3516 Generator Set Engines Engine Oil and Water Pump Drive - Remove and Install
797F and 797F XQ Off-Highway Truck Hydraulic Fan System Piston Pump (Hydraulic Fan)
3508, 3512 and 3516 Generator Set Engines Accessory Drive (Front) - Assemble
3508, 3512 and 3516 Generator Set Engines Accessory Drive (Front) - Disassemble
C13, C15, and C18 Tier 4 Interim Engines Fuel Pressure Is High
C13, C15, and C18 Tier 4 Interim Engines Fuel Pressure Is Low
CX31-P600 Petroleum Transmission Drive Axle Control - 2WD Dropbox
C15 and C18 Tier 4 Final Engines Aftercooler - Test
C27 and C32 Engines for Caterpillar Built Machines Fuel System - Prime
C9.3 Tier 4 Final Engines Air Inlet and Exhaust System - Inspect
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pump
797F and 797F XQ Off-Highway Truck Hydraulic Fan System Pressure Reducing Valve (Fan Drive)
G3304B and G3306B Engines Engine Governing - Adjust
3508, 3512 and 3516 Generator Set Engines Engine Oil and Water Pump Drive - Assemble
3508C, 3512C, and 3516C Locomotive Engines System Overview
C13, C15, and C18 Tier 4 Interim Engines Fuel Temperature Is High
3508, 3512 and 3516 Generator Set Engines Vibration Damper - Remove and Install
2009/11/02 A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
793F Off-Highway Truck Engine Supplement Engine and Torque Converter - Remove and Install
Exhaust Leaks on C175 Generator Sets with the 290-1620 Exhaust Adapter and the 289-9969 Exhaust Adapter {1061} Exhaust Leaks on C175 Generator Sets with the 290-1620 Exhaust Adapter and the 289-9969 Exhaust Adapter {1061}
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System Determining Diagnostic Codes
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0191 - FMI 02
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 1227 - FMI 02
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 1227 - FMI 08