Governor Actuator - Remove and Install
Show/hide table
Be sure that the engine cannot be started while service work is being done. This is very important when the engine is equipped with an Automatic Start-Stop System. On engines equipped with an air starting system, close the air supply valve that supplies air to the starter motor before service work is begun. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
Illustration 1 | g02013554 |
- Disconnect the harness assembly from governor actuator (3).
- Disconnect rod assembly (1) from governor actuator (3).
- Remove nuts (2), governor actuator (3), and the gasket from the governor drive.
- Install governor actuator (3) in the reverse order of removal.
- If necessary, install new studs for governor actuator (3). Tighten the studs to a torque of
17 ± 5 N·m (150 ± 45 lb in) . - Ensure that the splines on governor actuator (3) are correctly engaged during installation.
- If necessary, install new studs for governor actuator (3). Tighten the studs to a torque of
Caterpillar Information System:
797F Off-Highway Truck Steering System Oil Cooler (Brake, Hydraulic Fan, Steering)
C15 Engine Refill Capacities and Recommendations
C15 Engine Plate Locations and Film Locations
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Safety Messages
C15 Engine Product Description
G3512E Generator Set Engine Fuel Control - Test
C13, C15, and C18 Tier 4 Interim Engines Timing - Calibrate
2009/10/19 A New Backing Pad Is Available for the 127 mm (5 inch) Rotary Grinding Disc {0674, 0677, 0685}
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Engine Starting
G3304B and G3306B Engines Intake Manifold Air Pressure Is High
C15 Engine Maintenance Interval Schedule
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Aftercooler Core - Clean/Test - Sea Water Cooled (If Equipped)
C32 Petroleum Generator Sets Product Description
C32 Petroleum Generator Sets Plate Locations and Film Locations
C15 Engine Safety Messages
797F and 797F XQ Off-Highway Truck Automatic Lubrication System for Electric Start and Air Start Equipped Trucks General Information
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0262 - FMI 03
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0262 - FMI 04
C175-16 and C175-20 Generator Set Engines Oil Temperature Is High
C15 Engine Model View Illustrations
3508, 3512 and 3516 Generator Set Engines Governor Drive - Remove and Install
G3304B and G3306B Engines Engine Shutdown Occurrence
C15 Engine Product Lifting
C15 and C18 Engines Engaging the Driven Equipment