1979/09/17 Caterpillar


New BrakeSaver Control Valve Group Has Improved Diaphragm{1159,1155}

Usage:


3406 and 3408 Truck Engines Equipped With BrakeSavers

Description of Change: A new BrakeSaver control valve group with an improved diaphragm is used on 3406 and 3408 Truck Engines so equipped. The diaphragm in the new control valve group is made of a material which has more resistance to heat than the material in the diaphragm used in the former control valve group. For this reason the diaphragm in the new control valve group will give longer service life.

Adaptable As: The new parts are direct replacements for the former parts as shown in the parts chart.

Caterpillar Information System:

1979/09/17 New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/10 Engines Can Use Crankshafts With Either Six Or Eight Counterweights {1202}
1979/09/10 Pin Bore Is Now Offset (Not In The Center) .059" (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10 Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10 Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10 Different Grease Fitting Now Used In Fan Drive Group {1359}
1979/09/10 New Gasket Used In Water Lines Group For Aftercooler {1380,1063}
1979/09/10 Undercarriage Disassembly And Assembly Procedures And Specification Charts Are Available {4150,4159,4154,4171,4180}
1979/09/10 6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10 Stronger Bolt Now Used With Exhaust Manifold {1059,1307}
1979/09/10 Insulation Sleeve For 5P7360 Tach Generator Now Available {7462}
1979/09/03 Different Mounting Hole Locations In Ring Gear Plate Assembly And Rotor Assembly For BrakeSaver{1155}
1979/09/17 Keystone Piston Groups Can Be Installed In Earlier Engines In Steiger Tractors{1214,1215}
1979/09/17 Raw Water Pump Improved{1371}
1979/09/17 Improved Sea Water Pump Now Used{1361,1371}
1979/09/17 New Bracket Available For Installation Of Jacket Water Heater{1383}
1979/09/17 6V2042 Alignment Yoke And 6V2043 Alignment Bar Available{0653,3305,4450}
1979/09/24 8S9901 Tool Cart Can Be Adapted To Hold Both The 5P3600 Hydraulic Flow Meter Group And The Tools Used With It{0651}
1979/09/24 Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/10/01 New Liner Seat Inserts For Spacer Plate Cylinder Blocks Are Made Of Stainless Steel{1217,1201,0663}
1979/10/01 Steel Plates Are Now Used To Hold The Element In Position In The Panel-Type Air Cleaner Housing Assembly{1051,1054}
1979/10/01 Tips For SIRS (Service Information Retrieval System) Users{0374}
1979/10/01 New Aftercooler Core Has Stronger Construction And Corrosion Resistance{1064}
1979/10/01 New Planet Gears For Power Shift Transmissions And/Or Winches Have No Oil Grooves On the Faces{3176,5165}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.