797 Off-Highway Truck Caterpillar


Engine Crankcase Breather - Clean

Usage:

797 5YW


Ilustrasi 1g01995714
Tipe 1

Engine pada alat berat ini dilengkapi dengan breather karter engine (1) di bagian belakang engine.



Ilustrasi 2g06241103
Tipe 2

Engine di alat berat ini dilengkapi dengan breather penutup katup engine (2) di setiap sisi engine. Mungkin terdapat beberapa breather penutup katup pada setiap sisi engine.

  1. Tahan bak pembuangan pada posisi naik penuh dan siapkan alat berat untuk perawatan. Rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Mempersiapkan Alat Berat untuk Perawatan".

  2. Lepaskan baut dari klem pada dudukan breather (bila terpasang), atau klem pita dari dudukan breather (bila terpasang). Longgarkan klem selang.

  3. Lepaskan breather dari selang. Selang dapat berbentuk "T" atau elbow tergantung tipe breather pada engine.

  4. Lepaskan dan buang gasket breather, o-ring, dan seal yang lama. Gasket breather, o-ring, dan seal harus diganti setiap kali sambungan bermasalah.

  5. Cuci breather dalam pelarut yang bersih dan tidak mudah terbakar.

  6. Pasang gasket breather, o-ring, dan seal.

  7. Pasang selang pada breather. Jika selang telah rusak, selang harus diganti.

  8. Pasang klem selang pada breather. Pasang klem di bagian dasar breather.

  9. Kencangkan semua klem.

  10. Lepaskan kabel penahan bak truk dan turunkan bak.

Caterpillar Information System:

Specifications for the Inspection of Trunnions for Series 3500 Family of Engines {1154} Specifications for the Inspection of Trunnions for Series 3500 Family of Engines {1154}
C175-16 PETROLEUM ENGINES Fuel Pump (High Pressure) - Remove and Install
Installation and Configuration of the Acquisition Card{4480} Installation and Configuration of the Acquisition Card{4480}
Installation of the JBUS/MODBUS Communication Card{4480} Installation of the JBUS/MODBUS Communication Card{4480}
CX35-P800 Petroleum Transmission and CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages Transmission Oil Supply
Replacement of the Aftertreatment Regeneration Device (ARD) Combustion Head on Caterpillar Products with Clean Emissions Modules {108B, 108M} Replacement of the Aftertreatment Regeneration Device (ARD) Combustion Head on Caterpillar Products with Clean Emissions Modules {108B, 108M}
2009/10/01 A New Knowledge Network Community for C175 Generator Set Engines Is Active {1000}
G3500B Engines Air Lines
G3500B Engines Fuel Lines
797F Off-Highway Truck Breather (Differential and Final Drive) - Replace
797F Off-Highway Truck Hydraulic System Control Valve (Brake Cooling, Hoist)
C9.3 Industrial Engine Engine Oil and Filter - Change
797F and 797F XQ Off-Highway Trucks Cooling System Coolant (ELC) - Change
3500 Industrial Engines Electric Starting Motor
797F and 797F XQ Off-Highway Trucks Cooling System Coolant Extender (ELC) - Add
797F and 797F XQ Off-Highway Trucks Cooling System Coolant Level - Check
G3500B Engines Air Lines
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Travel Motor Lines
CX31-P600 Petroleum Transmission Transmission Covers - Side PTO
797F and 797F XQ Off-Highway Trucks Cooling System Pressure Cap - Clean/Replace
797F and 797F XQ Off-Highway Trucks Cooling System Relief Valve - Clean
C32 Marine Engine Engine Oil Level - Check
G3304B and G3306B Engines Water Pump - Test
CX35-P800 Petroleum Transmission and CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages Pump Drive - PTO
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.