3500 Industrial Engines Caterpillar

Illustration 1	g01501613

When the electric starting motor is viewed from the pinion end, the motor rotates in the following direction. ... Clockwise

(B) The clearance between the pinion and the housing ... 9.1 mm (0.36 inch)

(1) Final installation torque for the nut for ground terminal ... 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)

(2) Final installation torque for the nut for ground terminal ... 2.25 ± 0.25 N·m (19.91 ± 2.21 lb in)

(3) Final installation torque for the nut for switch terminal ... 2.25 ± 0.25 N·m (19.91 ± 2.21 lb in)

(4) Final installation torque for the nut for motor terminal ... 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)

Note: A maximum of three cable terminals or wire terminals may be used with the nut. A maximum of two of the terminals may be equal to or greater than 0 AWG.

(5) Final installation torque for the nut for battery terminal ... 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)

(6) Final installation torque for the nut for motor frame terminal ... 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)

Solenoid

Current consumption (draw) at 32 V and at 25 °C (77 °F)

Pull-in windings ... 41 ± 3 Amp

Hold-in windings ... 6.3 Amp

Operating temperature ... −25 to 121 °C (−13 to 250 °F)