C13 Engine for Caterpillar Built Machines Caterpillar


Belt Tensioner - Remove and Install

Usage:

730C2 2T4

Removal Procedure

  1. Remove the belt. Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".


    Illustration 1g01924155

  2. Remove bolt (1) and belt tensioner (2).

Installation Procedure

  1. Install a belt tensioner (2) in reverse order of removal.

Caterpillar Information System:

G3304B and G3306B Engines Indicator Lamp - Test
C7.1 Industrial Engine and Generator Set 5 Volt Sensor Supply Circuit - Test
C18 Marine Generator Set Model View Illustrations
3516B Engine for 994F and 994H Wheel Loaders Power Is Intermittently Low or Power Cutout Is Intermittent
2009/06/01 A Hotline for the Fuel Systems for Hydraulic Electronic Unit Injectors (HEUI) Is Now Available. {1251, 1290}
2009/06/08 A Hotline for the Fuel Systems for Hydraulic Electronic Unit Injectors (HEUI) Is Now Available. {1251, 1290}
C11, C13 and C15 On-highway Engines 0173-00 High Exhaust Gas Temperature Derate
Failures of Cylinder Heads with the Intake Valves and Exhaust Valves in the Incorrect Positions{1100, 1105} Failures of Cylinder Heads with the Intake Valves and Exhaust Valves in the Incorrect Positions{1100, 1105}
Procedure to Rerate the Engine with Caterpillar Electronic Technician (ET) {1901, 1902, 1920} Procedure to Rerate the Engine with Caterpillar Electronic Technician (ET) {1901, 1902, 1920}
G3304B and G3306B Engines Spark Plug - Test
2009/06/01 Guidelines for Reusability of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, and Connecting Rod Cap Bolts and Nuts {1100, 1218, 1230}
C9.3 Engines for Caterpillar Built Machines Fuel Lines - Remove and Install
C7 Petroleum Engine Installation Environment
C32 Petroleum Engines Installation Environment
G3304B and G3306B Engines Carburetor - Install
C7 Petroleum Engine Plate Locations and Film Locations
G3304B and G3306B Engines Spark Plugs - Remove and Install
G3304B and G3306B Engines Spark Plug Adapter - Remove and Install
C13 Engine for Caterpillar Built Machines Accessory Drive - Remove and Install - Brackets and Pulleys
C9 Engine Monitoring System
C32 Petroleum Engines Monitoring System
G3304B and G3306B Engines Exhaust Manifold - Remove
C7 Engines for Combat and Tactical Vehicles Safety Messages
2009/06/22 Fuel Injection Pump Latch Valve {1251}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.