Soot Antenna - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 4C-5597 | Anti-Seize Compound | - |
- Disconnect the harness assembly and remove soot antennae (1). Repeat this step for the opposite side.
Show/hide table
Illustration 1 | g02338682 |
- Install the soot antennas (1) in reverse order.
- Apply Tooling (A) to the threads on soot antennas (1). Torque soot antennas (1) to a torque of
45 ± 5 N·m (33 ± 4 lb ft) .
- Apply Tooling (A) to the threads on soot antennas (1). Torque soot antennas (1) to a torque of
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Boost Pressure Sensor
C13 Engines for Caterpillar Built Machines Flame Detection Temperature Sensor - Remove and Install - Clean Emissions Module
C18 Marine Engines Engine Speed/Timing Sensor - Clean/Inspect
C32 Marine Engine Pinion Clearance - Adjust
C7.1 Industrial Engine and Generator Set Ignition Keyswitch Circuit and Battery Supply Circuit - Test
C7.1 Industrial Engine and Generator Set Engine Pressure Sensor Open or Short Circuit - Test
C15 and C18 Industrial Engines Clean Emissions Module Wiring - Remove and Install
C13 Engines for Caterpillar Built Machines Pressure Sensor (DPF) - Remove and Install - Differential Pressure, Clean Emissions Module
C18 Marine Generator Set Product Description
C18 Marine Auxiliary Engine Product Description
C15 and C18 Industrial Engines Nozzle Heater Harness - Remove and Install
C13 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install - Clean Emissions Module
C7.1 Industrial Engine and Generator Set Idle Validation Switch Circuit - Test
C13 Engines for Caterpillar Built Machines Catalyst - Remove and Install - Diesel Oxidation Catalyst, Clean Emissions Module
C7.1 Industrial Engine and Generator Set Indicator Lamp Circuit - Test
C13 Engines for Caterpillar Built Machines Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
C9.3 Industrial Engine Air Compressor
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125} Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
793F and 797F Off-Highway Trucks Power Train Electronic Control System Retarder Is Aggressive
2009/10/29 A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
2009/10/29 A New Bowl for the Fuel/Water Separator Is Available {1261, 1263}
C9.3 Tier 4 Final Engines Crankcase Pressure Sensor
3508C, 3512C, and 3516C Locomotive Engines Acceleration Is Poor or Throttle Response Is Poor