Pressure Sensor (DPF) - Remove and Install - Differential Pressure, Clean Emissions Module
- Disconnect tube assemblies (1) and (2).
Show/hide table
Illustration 2 g02321554 - Disconnect harness assemblies (3) and (4).
- Remove bolts (6) and remove sensor manifold (5). Remove the two tube assemblies from sensor manifold (5).
Show/hide table
Illustration 3 g02321434 - Remove four Torx bolts (8) and remove differential pressure sensor (9). Remove O-ring seals (7) from manifold (5).
- Remove pressure sensor (10) and remove O-ring seal (11).
Show/hide table
Illustration 1 | g02321433 |
View of the CEM and sensor location. |
- Install differential pressure sensor (9) and pressure sensor (10) in the reverse order.
- Tighten pressure sensor (10) to a torque of
10 ± 2 N·m (89 ± 18 lb in) .
- Tighten pressure sensor (10) to a torque of
Caterpillar Information System:
C18 Marine Generator Set Product Description
C18 Marine Auxiliary Engine Product Description
C15 and C18 Industrial Engines Nozzle Heater Harness - Remove and Install
C13 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
G3304B and G3306B Engines Diagnostic Trouble Codes
G3304B and G3306B Engines Fuel Shutoff - Test
793F and 797F Off-Highway Trucks Braking System Brakes Overheat
C13 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install - ARD Combustion, Clean Emissions Module
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 2448 - FMI 14
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 2448 - FMI 09
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 2448 - FMI 02
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1963 - FMI 06
C15 and C18 Industrial Engines Clean Emissions Module Wiring - Remove and Install
C7.1 Industrial Engine and Generator Set Engine Pressure Sensor Open or Short Circuit - Test
C7.1 Industrial Engine and Generator Set Ignition Keyswitch Circuit and Battery Supply Circuit - Test
C32 Marine Engine Pinion Clearance - Adjust
C18 Marine Engines Engine Speed/Timing Sensor - Clean/Inspect
C13 Engines for Caterpillar Built Machines Flame Detection Temperature Sensor - Remove and Install - Clean Emissions Module
C13, C15, and C18 Tier 4 Final Engines Boost Pressure Sensor
C27 and C32 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor
C13 Engines for Caterpillar Built Machines Soot Antenna - Remove and Install
C13 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install - Clean Emissions Module
C7.1 Industrial Engine and Generator Set Idle Validation Switch Circuit - Test
C13 Engines for Caterpillar Built Machines Catalyst - Remove and Install - Diesel Oxidation Catalyst, Clean Emissions Module