Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
Removal Procedure
Note: Cleanliness is an important factor. Before the disassembly procedure, clean the exterior of the component. This action will help to prevent dirt from entering the internal mechanism.
Note: Cap all lines and fittings that are disconnected in order to prevent fluid loss. This action will also keep contaminants out of the system.
- Disconnect hose assemblies (1) .
Show/hide table
Illustration 1 | g02296034 |
View from the side of the Clean Emissions Module |
- Disconnect harness assemblies (2) and (3) .
Show/hide table
Illustration 2 | g02296454 |
- Remove bolts (5) , position clips (5) out of the way, and remove fuel control manifold (4) .
- Remove fuel pressure sensors (9) and remove fuel filter fitting (7) .
Show/hide table
Illustration 3 | g02203433 |
Show/hide table
Illustration 4 | g02203476 |
- Remove fittings (10) and (11) .
- Remove nut (16) , washer (15) , and solenoid (14) from valve assembly (8) .
- Remove O-ring seals (12) from cartridge (13) .
- Repeat this step for the other solenoid operated fuel valve (9) .
Installation Procedure
- Install fuel control manifold (4) in reverse order of removal.
- Tighten pressure sensors (9) to a torque of 20 ± 3 N·m (177 ± 27 lb in).
- Tighten cartridge (13) to a torque of 50 ± 5 N·m (37 ± 5 lb ft).
- Tighten nuts (16) to a torque of 20 ± 2.5 N·m (177 ± 25 lb in).
Caterpillar Information System:
G3304B and G3306B Engines Diagnostic Trouble Codes
G3304B and G3306B Engines Fuel Shutoff - Test
793F and 797F Off-Highway Trucks Braking System Brakes Overheat
C13 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install - ARD Combustion, Clean Emissions Module
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 2448 - FMI 14
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 2448 - FMI 09
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 2448 - FMI 02
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1963 - FMI 06
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1963 - FMI 05
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1963 - FMI 03
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1962 - FMI 08
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1962 - FMI 04
C15 and C18 Industrial Engines Nozzle Heater Harness - Remove and Install
C18 Marine Auxiliary Engine Product Description
C18 Marine Generator Set Product Description
C13 Engines for Caterpillar Built Machines Pressure Sensor (DPF) - Remove and Install - Differential Pressure, Clean Emissions Module
C15 and C18 Industrial Engines Clean Emissions Module Wiring - Remove and Install
C7.1 Industrial Engine and Generator Set Engine Pressure Sensor Open or Short Circuit - Test
C7.1 Industrial Engine and Generator Set Ignition Keyswitch Circuit and Battery Supply Circuit - Test
C32 Marine Engine Pinion Clearance - Adjust
C18 Marine Engines Engine Speed/Timing Sensor - Clean/Inspect
C13 Engines for Caterpillar Built Machines Flame Detection Temperature Sensor - Remove and Install - Clean Emissions Module
C13, C15, and C18 Tier 4 Final Engines Boost Pressure Sensor
C27 and C32 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor