1988/10/17 Caterpillar

New Service Tools Available{0600}

Usage:

SUPPLEMENT: 09/24/90

SERVICE MAGAZINE; OCTOBER 17, 1988; PAGE 5; "New Service Tools Available". In the first row of the chart, in the Tool Announcement column, disregard Special Instruction SEHS8894. This special instruction was never published.

--------------- END SUPPLEMENT ---------------

The chart shows new tools available from Caterpillar. More detailed information is given in the Tool Announcement for each tool. The Tool Announcements have been distributed and a copy should be filed in the Tool Guide.

Some tools have a Special Instruction that shows how to use the tool. If available, the Special Instruction form number is shown in the last column of the chart along with the Tool Announcement form number.

Dealers in NACD, COSA and Caterpillar Americas can order drawings of Fabricated Tools (FT) from the address that follows. When ordering, be sure to include your dealer code and address so your request will receive immediate attention. All other dealers can order drawings from their Subsidiary Service Department.

Caterpillar Inc.
AD180 Publications Print Room
600 West Washington Street
East Peoria, IL 61630-0371 (U.S.A.)
Phone: 309-675-7292
Telex: TRT 190425

Caterpillar Information System:

1988/10/03 Tool Storage For Centurion Track Press Tools {4150,0660,0729}

1988/10/03 Main Rotor Shaft Changed to Eliminate Loose Connecting Bolts {4457}

1988/10/03 Check Valve Added To Keep Air From Entering Fuel System {1264}

1988/09/26 Multipurpose Storage And Handling Systems For Parts {1100,0660}

1988/09/26 New VR3 Regulator Has Improved Short Circuit Protection {4474}

1988/09/19 Caterpillar Introduces A "Hotline" For Medical Information On Hazardous Materials (U.S. And Canada){0353,0373}

1988/09/19 New Service Tools Available{0600}

1988/09/19 Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers{1059,1070}

1988/09/19 New Heat Sinks Have Solid Diode Wires{4472}

1988/09/19 New Dipstick, Breather, And Oil Filler Cap Minimize Oil Leakage{3311,3354}

1988/09/05 Improved Air Cleaner Element Has Pleats That Are Evenly Spaced{1054}

1988/09/05 New Piston Cooling Jets Used{1331,1200}

1988/10/17 Self-Locking Bolts Used In Front Timing Gear Group{1206}

1988/10/17 New Woodward Actuator Assembly (EG10P) Has Lower Relief Valve Setting{1289}

1988/10/24 New Graphite Exhaust Manifold Gasket Replaces Stainless Steel Gasket{1059}

1988/10/24 New Flywheel Assemblies Used In With Rear PTO Arrangements{1156}

1988/10/24 Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}

1988/10/24 Seal Retainer And Seals Are Required When A New Cylinder Head Assembly Is Installed{1100}

1988/10/31 New Fuel Shutoff Solenoid Assembly Used{1259}

1988/10/31 New Air Cleaner Group Has Improved Crankcase Fumes Disposal{1051,1054,1317}

1988/11/07 New Oil Pressure Sender Assembly Used{7455}

1988/11/07 Identification Of Surge Suppressors{4454,4466}

1988/11/07 Identification Of Jacket Water Heater Elements{1383}

1988/11/07 Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}