1988/10/03 Caterpillar

Tool Storage For Centurion Track Press Tools {4150,0660,0729}

Usage:

Reference: Service Magazine; September 26, 1988; Page 7; "Multi-Purpose Storage And Handling Systems For Parts".

Reference: Undercarriage Reconditioning Bulletin No. TE-3, Form SEBF8559, "Tool Storage for Centurion Track Press Tools."

An Extendo® rack and Vidmar® cabinets are now available to provide storage for track press tooling. The new storage units provide a compact and orderly way to store the tooling near the track press. The shelves in the Extendo rack fully extend to allow easy access to all tools stored on them. The Vidmar cabinets use drawer dividers to allow for individual labeling and storage of the tools within each drawer. Tools stored in the cabinet are protected from damage and the surrounding elements.

The Extendo rack and Vidmar cabinets as shown in the illustration are available from:

Draik Midwest Company, Inc.
P. O. Box 1638
Oakbrook, Il 60522-1638
Telephone: (312) 986-1477

Recommended arrangement for storing track press tooling.

Caterpillar Information System:

1988/10/03 Main Rotor Shaft Changed to Eliminate Loose Connecting Bolts {4457}

1988/10/03 Check Valve Added To Keep Air From Entering Fuel System {1264}

1988/09/26 Multipurpose Storage And Handling Systems For Parts {1100,0660}

1988/09/26 New VR3 Regulator Has Improved Short Circuit Protection {4474}

1988/09/19 Caterpillar Introduces A "Hotline" For Medical Information On Hazardous Materials (U.S. And Canada){0353,0373}

1988/09/19 New Service Tools Available{0600}

1988/09/19 Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers{1059,1070}

1988/09/19 New Heat Sinks Have Solid Diode Wires{4472}

1988/09/19 New Dipstick, Breather, And Oil Filler Cap Minimize Oil Leakage{3311,3354}

1988/09/05 Improved Air Cleaner Element Has Pleats That Are Evenly Spaced{1054}

1988/09/05 New Piston Cooling Jets Used{1331,1200}

1988/09/05 New Rocker Arm Shaft Assembly and Bolts Used{1102}

1988/10/17 New Service Tools Available{0600}

1988/10/17 Self-Locking Bolts Used In Front Timing Gear Group{1206}

1988/10/17 New Woodward Actuator Assembly (EG10P) Has Lower Relief Valve Setting{1289}

1988/10/24 New Graphite Exhaust Manifold Gasket Replaces Stainless Steel Gasket{1059}

1988/10/24 New Flywheel Assemblies Used In With Rear PTO Arrangements{1156}

1988/10/24 Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}

1988/10/24 Seal Retainer And Seals Are Required When A New Cylinder Head Assembly Is Installed{1100}

1988/10/31 New Fuel Shutoff Solenoid Assembly Used{1259}

1988/10/31 New Air Cleaner Group Has Improved Crankcase Fumes Disposal{1051,1054,1317}

1988/11/07 New Oil Pressure Sender Assembly Used{7455}

1988/11/07 Identification Of Surge Suppressors{4454,4466}

1988/11/07 Identification Of Jacket Water Heater Elements{1383}