Atmospheric Pressure Sensor - Remove and Install
拆卸步骤
- 拆下软管组件 (1) 。
Show/hide table
图 1 | g01868533 |
- 断开线束组件后拆下大气压力传感器 (3) 。
Show/hide table
图 2 | g01868513 |
安装步骤
- 按相反顺序安装大气压力传感器 (3) 。
- 将大气压力传感器 (3) 上紧到 10 ± 2 N·m (89 ± 18 lb in) 的扭矩。
Caterpillar Information System:
C13, C15, and C18 Tier 4 Interim Engines Oil Contains Coolant
MP-15, MP-20, MP-30 and MP-40 Multi Processors Hydraulic Rotator
C7.1 Industrial Engine and Generator Set Sensors and Electrical Connectors
C4.4 Industrial Engine Piston and Rings
C6.6 Industrial Engine Main Bearing Journal
C6.6 Industrial Engine Cylinder Head Valves
C13 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install - C15 Engine
C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
793F and 797F Off-Highway Trucks Braking System Brakes Drag
C12 Marine Engines Engine Valve Lash - Inspect/Adjust
C15 and C18 Engines for Caterpillar Built Machines Crankcase Pressure Sensor - Remove and Install
C12 Marine Engines Fuel System Secondary Filter - Replace
C13, C15, and C18 Tier 4 Interim Engines Engine Does Not Crank
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Engine Has Early Wear
C9.3 Engines for Caterpillar Built Machines Fuel Consumption Is Excessive
C13 Engine for Caterpillar Built Machines Crankshaft Rear Seal - Remove and Install
C32 Auxiliary Engine Maintenance Recommendations
C9.3 Engines for Caterpillar Built Machines Engine Has Mechanical Noise (Knock)
C9.3 Engines for Caterpillar Built Machines Valve Lash Is Excessive
C6.6 Industrial Engine Engine Oil Pressure