CX31-P600 Petroleum Transmission Well Servicing Caterpillar


Control Manifold - Remove

Usage:

CX31-C18I PDC

拆卸步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。



注意

在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。

有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。

按照本地法规和条例处置所有液体。





    图 1g01842714

  1. 断开线束组件 (1) 并拆下连接紧固件。 拆下螺栓 (2) ,以便拆下控制歧管 (3) 。



    图 2g01842754

  1. 拆下 O 形密封圈 (4) 。 拆下分离器板 (5) 。



    图 3g01842775

  1. 拆下 O 形密封圈 (6) 。

Caterpillar Information System:

CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Side PTO, No Retarder
CX31-P600 Petroleum Transmission Safety Messages
CX31-P600 Petroleum Transmission Well Servicing Torque Converter - Install
CX31-P600 Petroleum Transmission Well Servicing Torque Converter - Remove
C15 and C18 Industrial Engines Turbocharger - Remove and Install
C15 and C18 Industrial Engines Fuel Transfer Pump - Remove and Install
2009/03/23 Replacement Panels for the Generator Set Enclosures {7274}
795F AC and 795F AC XQ Off-Highway Trucks Electrical Shutdown and Voltage Discharge
C13 Engine for Combat and Tactical Vehicles Aftercooler - Test
C175-16 Petroleum Generator Set Engines Maintenance Recommendations
2009/03/09 Hard Starting of 3456 and C15 Generator Sets {1261, 1263}
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks ECM - Replace
CX31-P600 Petroleum Transmission Well Servicing Control Manifold - Install
C15 and C18 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
CX31-P600 Petroleum Transmission Well Servicing Pump Drive - Remove
CX31-P600 Petroleum Transmission Well Servicing Pump Drive - Install
784C and 785C Off-Highway Truck/Tractors System Pressure Release
795F and 795F AC XQ Off-Highway Truck Steering System Metering Pump (Steering)
CX31-P600 Petroleum Transmission Well Servicing Gear Pump (Torque Converter and Transmission) - Remove
CX31-P600 Petroleum Transmission Well Servicing Gear Pump (Torque Converter and Transmission) - Install
CX31-P600 Petroleum Transmission Well Servicing Oil Filter and Base (Power Train) - Remove and Install
795F AC and 795F AC XQ Off-Highway Trucks Electric Retarder - Clean - Inlet Screen
CX31-P600 Petroleum Transmission Plate Locations and Film Locations
CX31-P600 Petroleum Transmission Well Servicing Speed Sensor (Transmission) - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.