Gear Pump (Torque Converter and Transmission) - Remove
拆卸步骤
开始:
- 将变速箱从发动机上分离。 请参阅拆解和装配, "发动机、变矩器和变速箱 - 分离"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 拆下挡圈 (1) 和挡圈 (2) 。 拆下轴承组件 (3) 和输出轴 (4) 。
Show/hide table
 | |
| 图 1 | g01843618 |
- 拆下螺栓 (5) 和盖 (6) 。
Show/hide table
 | |
| 图 2 | g01843638 |
- 拆下 O 形密封圈 (7) 。
Show/hide table
 | |
| 图 3 | g01843639 |
- 拆下磁性滤清器 (8) 和滤网 (9) 。
Show/hide table
 | |
| 图 4 | g01843642 |
- 拆下螺栓 (10) ，以便拆下防护罩 (11) 。
Show/hide table
 | |
| 图 5 | g01843733 |
- 断开线束组件 (12) 。
Show/hide table
 | |
| 图 6 | g01843774 |
- 拆下螺栓 (13) 和螺栓 (14) 。 拆下油底壳 (15) 。
Show/hide table
 | |
| 图 7 | g01844394 |
- 拆下 O 形密封圈 (16) 、O 形密封圈 (17) 和密封 (18) 。
Show/hide table
 | |
| 图 8 | g01844416 |
- 断开管组件 (19) 和管组件 (20) 。 拆下螺栓 (21) ，以便拆下壳体 (22) 。
Show/hide table
 | |
| 图 9 | g01844421 |
- 拆下螺栓 (23) ，以拆下齿轮泵 (24) 。
Show/hide table
 | |
| 图 10 | g01844423 |
- 拆下 O 型密封圈 (25) 。
Show/hide table
 | |
| 图 11 | g01844433 |
Caterpillar Information System:
795F and 795F AC XQ Off-Highway Truck Steering System Metering Pump (Steering)
784C and 785C Off-Highway Truck/Tractors System Pressure Release
CX31-P600 Petroleum Transmission Well Servicing Pump Drive - Install
CX31-P600 Petroleum Transmission Well Servicing Pump Drive - Remove
C15 and C18 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
CX31-P600 Petroleum Transmission Well Servicing Control Manifold - Install
CX31-P600 Petroleum Transmission Well Servicing Control Manifold - Remove
CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Side PTO, No Retarder
CX31-P600 Petroleum Transmission Safety Messages
CX31-P600 Petroleum Transmission Well Servicing Torque Converter - Install
CX31-P600 Petroleum Transmission Well Servicing Torque Converter - Remove
C15 and C18 Industrial Engines Turbocharger - Remove and Install
CX31-P600 Petroleum Transmission Well Servicing Gear Pump (Torque Converter and Transmission) - Install
CX31-P600 Petroleum Transmission Well Servicing Oil Filter and Base (Power Train) - Remove and Install
795F AC and 795F AC XQ Off-Highway Trucks Electric Retarder - Clean - Inlet Screen
CX31-P600 Petroleum Transmission Plate Locations and Film Locations
CX31-P600 Petroleum Transmission Well Servicing Speed Sensor (Transmission) - Remove
CX31-P600 Petroleum Transmission Well Servicing Speed Sensor (Transmission) - Install
CX31-P600 Petroleum Transmission Component Location
2009/06/01 A New Crankshaft Gear, Cluster Gear Assembly, and Crankshaft Assembly Are Now Used {1151, 1162, 1202, 1206}
C15 and C18 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Disassemble
CX31 On-Highway Transmission Power Train Retarder - Remove
CX31 On-Highway Transmission Power Train Retarder - Install
2013/01/28 Improved Hardware for the Camshaft Thrust Plate Is Used in Certain 3500 Engines {1204, 1210}