Vibration Damper - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 138-7573 | 提升支架 | 2 |
| B | - | 导向双头螺栓 1 - 14 × 10 in |
2 |
- 拆下螺栓 (1) ，以便拆下防护罩 (2) 。
Show/hide table
 | |
| 图 1 | g00997926 |
- 卸下护罩组件 (3) 。
- 拆下两个螺栓 (4) 并安装工具 (B) 。
Show/hide table
 | |
| 图 2 | g01725524 |
- 将工具 (A) 和适当的提升设备连接在减振器 (5) 上。 减振器 (5) 的重量约为 140 kg (309 lb)。 拆下剩余的螺栓 (4) 。 拆卸减振器 (5) 。
- 从减震器 (5) 的凹进区域拆下平面密封件 (6) 。
Show/hide table
 | |
| 图 3 | g01727913 |
Caterpillar Information System:
G3520C and G3520E Generator Set Engines Vibration Damper - Assemble
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
G3520C and G3520E Generator Set Engines Vibration Damper - Disassemble
2008/12/01 Water Temperature Regulator {1355, 1380}
793F and 797F Off-Highway Trucks Chassis Electronic Control System System Schematic
G3500B Engines Camshaft
G3500B Engines Configuration Parameters
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Main Hydraulic Pump and Pump Drive Coupling - Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Main Hydraulic Pump and Pump Drive Coupling - Remove
2008/11/01 Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17 Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17 Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17 The 6V-4022 Fuel Injector Tester Is not Available {1251, 1254, 1290, 1713}
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Speed Sensor (Transmission) - Engine Output
2008/11/17 The 6V-4022 Fuel Injector Tester Is not Available {1251, 1254, 1290, 1713}
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Speed Sensor (Transmission) - Torque Converter Output
G3500B Engines Speed/Timing - Test
G3520B Engines Stub Shaft (Front)
3500 Engines with EUI Option Turbocharger
3500 Engines with EUI Option Turbocharger
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
3306C Engines for Caterpillar Built Machines Turbocharger
2008/11/01 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17 Calibration Fluid for Fuel Nozzle Test Equipment Is Available {0782, 1251, 1254, 1290, 1713}