Main Hydraulic Pump and Pump Drive Coupling - Install
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 140-7742     | 套筒     | 1     |
B     | 138-7573     | 连杆支架     | 2     |
C     | 155-0695     | 螺纹锁固胶     | -     |
- 将工具 (C) 涂敷在螺栓 (16) 的螺纹上。 定位连接组件 (17) 并安装螺栓 (16) 。
Show/hide table
图 1 | g01760886 |
- 将工具 (B) 和适当的起吊设备连接到主液压泵 (9) 上。 主液压泵 (9) 的重量约为 318 kg (700 lb)。 安装主液压泵 (9) 和螺栓 (15) 。
Show/hide table
图 2 | g01760817 |
Show/hide table
图 3 | g01760733 |
- 安装盖 (14) 。
Show/hide table
图 4 | g01760637 |
- 连接软管组件 (12) 和 (13) 。
Show/hide table
图 5 | g01760233 |
Show/hide table
图 6 | g01760635 |
- 连接管组件 (11) 。 将所有软管组件 (10) 连接到主液压泵 (9) 上。
Show/hide table
图 7 | g01760633 |
- 安装盖 (8) 。 将线束组件 (7) 连接到主液压泵和盖 (8) 上。
Show/hide table
图 8 | g01759935 |
- 安装护罩 (6) 。
Show/hide table
图 9 | g01759853 |
- 将工具 (A) 和适当的起吊设备连接在支架 (5) 上。 支架 (5) 的重量约为 43 kg (95 lb)。
Show/hide table
图 10 | g01759840 |
- 将盖 (4) 作为一个整体安装。
Show/hide table
图 11 | g01759796 |
- 安装托架 (2) 和盖 (3) 。
Show/hide table
图 12 | g01759793 |
- 安装支架 (1) 。
Show/hide table
图 13 | g01759777 |
- 向液压油箱注油。 请参阅操作和保养手册, "液压系统油 - 更换"。
End By: 安装消音器。 请参阅 拆解和组装, "消音器 - 安装"。
Caterpillar Information System:
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Main Hydraulic Pump and Pump Drive Coupling - Remove
2008/11/01 Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17 Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17 Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/12/01 New Primary Fuel Filter {1258, 1261, 1263}
G3500B Engines Diagnostic Trouble Codes
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Gear Pump (Pilot) - Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Gear Pump (Pilot) - Remove
G3500B Engines Troubleshooting Data Sheet
C6.6 Marine Generator Set EMCP3 General Information
C6.6 Marine Generator Set Jacket Water Heater - Remove and Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Fan Pump - Install
G3500B Engines Configuration Parameters
G3500B Engines Camshaft
793F and 797F Off-Highway Trucks Chassis Electronic Control System System Schematic
2008/12/01 Water Temperature Regulator {1355, 1380}
G3520C and G3520E Generator Set Engines Vibration Damper - Disassemble
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
G3520C and G3520E Generator Set Engines Vibration Damper - Assemble
G3520C and G3520E Generator Set Engines Vibration Damper - Remove
2008/11/17 The 6V-4022 Fuel Injector Tester Is not Available {1251, 1254, 1290, 1713}
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Speed Sensor (Transmission) - Engine Output
2008/11/17 The 6V-4022 Fuel Injector Tester Is not Available {1251, 1254, 1290, 1713}
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Speed Sensor (Transmission) - Torque Converter Output