3500 Engines with EUI Option Caterpillar


Turbocharger

Usage:

3516 3SS



Illustration 1g01616117

Note: Before assembly, apply 4C-5599 Anti-Seize Compound to the threads and to the bearing surface of the bolts.

(1) Torque for four bolts ... 54 ± 5 N·m (40 ± 4 lb ft)




Illustration 2g01726094

(2) Torque for eight bolts for the turbine housing ... 40 ± 2 N·m (30 ± 1 lb ft)

(3) Torque for eight bolts for the compressor housing ... 40 ± 2 N·m (30 ± 1 lb ft)

Caterpillar Information System:

G3520B Engines Stub Shaft (Front)
G3500B Engines Speed/Timing - Test
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Speed Sensor (Transmission) - Torque Converter Output
2008/11/17 The 6V-4022 Fuel Injector Tester Is not Available {1251, 1254, 1290, 1713}
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Speed Sensor (Transmission) - Engine Output
2008/11/17 The 6V-4022 Fuel Injector Tester Is not Available {1251, 1254, 1290, 1713}
G3520C and G3520E Generator Set Engines Vibration Damper - Remove
G3520C and G3520E Generator Set Engines Vibration Damper - Assemble
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
G3520C and G3520E Generator Set Engines Vibration Damper - Disassemble
2008/12/01 Water Temperature Regulator {1355, 1380}
793F and 797F Off-Highway Trucks Chassis Electronic Control System System Schematic
3500 Engines with EUI Option Turbocharger
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
3306C Engines for Caterpillar Built Machines Turbocharger
2008/11/01 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17 Calibration Fluid for Fuel Nozzle Test Equipment Is Available {0782, 1251, 1254, 1290, 1713}
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/01 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
C15 and C18 Generator Set Engines Flywheel - Install
Roll Over Protective Structure and Falling Object Protective Structure Identification Film Retention{7000, 7405, 7557} Roll Over Protective Structure and Falling Object Protective Structure Identification Film Retention{7000, 7405, 7557}
2008/11/17 The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17 The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17 The 1U-6661 Pop Tester Gp and the 6V-4022 Fuel Injector Tester Were Discontinued {0782, 1251, 1254, 1290, 1713}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.