Part Numbers For Bulk Lengths Of Decal Stripes{7557}
Usage:
All Caterpillar Machines
For sometime all Caterpillar machines have been using the new decals with the double stripes. Part numbers of the double striped decals (films), without any models listed on the film, are not yet listed in the Parts Books. These stripes are available on bulk rolls of film, and the part number is determined by the overall width of the two stripes being replaced. Measure dimension (A) as shown in the illustration. Then refer to the chart for the bulk film part number.
Use dimension (A) to determine which bulk film to order.
Caterpillar Information System:
1988/01/04 Be Sure To Follow Correct Procedure When Checking Transmission Primary Clutch Pressures With Transmission Installed In Machine{3150}
1978/12/18 Caution: Do Not Change Orifice In Water Outlet Of Auxiliary Pump Group{1371}
1978/12/18 The FT530 Puller Now Can Do The Work Of Three Pullers{0621}
1978/12/18 Longer Bolts Are Now Used To Fasten The Engine Fan Assembly To The Adapter{1356}
1978/12/18 New Switch Assembly Used With Exhaust Gas Recirculation System{1080}
1978/12/18 Improved Cylinder Head Gasket Now Used{1101,1201}
1978/12/11 New Electric Service Meter Used{7480}
1978/12/11 New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets{1214,1215}
1978/12/04 90° Elbow Added To Air Cleaner Group To Prevent Damage To The Air Filter Service Indicator{1051,7452}
1978/12/04 New Exhaust Valve Has Improved Three-Piece Construction{1105}
1978/12/04 New Design Brace Used In 4N2905 Air Cleaner Group{1051}
1978/12/04 Some Force Is Needed To Turn The Drive Shaft In All Tyrone Gear-Type Pumps; New Torque Value For Body Bolts Of Tyrone Gear-Type Pumps{5073}
1988/01/04 New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04 Die Cast Flywheel Housing Has Less Weight{1157}
1988/01/25 New Undercarriage Reconditioning Bulletin-Sealed And Lubricated Track Servicing Procedure For Non-Restrained Track {4150,0374}
1988/01/25 New Microfiche Shows Part Numbers And Locations Of Decals And Stripes {0374,7557}
1988/01/25 New Bearings Available For Reverse Idler Gear {3300}
1988/01/25 8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25 New Engine Oil Coolers Have Rubber End Sheets {1378}
1988/02/01 New 1U7646 Coupler Available To Connect 1 "-12 Threaded Studs{0700}
1988/02/01 Replacement Gaskets Available For "V-E" Electrical Connectors{7553}
1988/02/01 New Shaft Used In Auxiliary Sea Water Pumps{1371,1389,1350}
1988/02/08 New Transmission And Engine Oil Cooler Has Rubber End Sheets{1375,1378}
1988/02/15 Assembly Of Face Seals And Connectors{0738,1250,4300,5050}