Turbocharger
Show/hide table
Illustration 1 | g02579779 |
Show/hide table
Specification for 307-6577 Turbocharger Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 1     | 268-2960 Clamp As     | Torque to 13.5 ± 1.0 N·m (119.5 ± 8.9 lb in).     |
2     | 1     | 9N-2038 Turbine Clamp As     | Use the following procedure to tighten the clamp assemblies for the turbocharger: 1. Tighten to 18.1 N·m (160.2 lb in). 2. Loosen to 5.6 N·m (49.6 lb in). 3. Again, tighten to 13.5 ± 1.0 N·m (119.5 ± 8.9 lb in).     |
3     | 4     | 2N-2766 Locknut     | Before assembly, apply 4C-5599 Anti-Seize Compound to the threads and the bearing surface of the full nuts that are used to mount the turbocharger. Torque to 55 ± 5 N·m (41 ± 4 lb ft).     |
-     | -     | -     | Opening pressure of the wastegate at 1.00 mm (0.039 inch) lift is 213.7 ± 3.5 kPa (31.0 ± 0.5 psi).     |
Caterpillar Information System:
Procedure to Provide Power for the 266-2296 Instrument Panel Gp {1408, 7451} Procedure to Provide Power for the 266-2296 Instrument Panel Gp {1408, 7451}
C12 Marine Engines Auxiliary Water Pump (Rubber Impeller) - Inspect/Replace
C12 Marine Engines Auxiliary Water Pump (Bronze Impeller) - Inspect/Replace
2009/09/28 A New Fuel Level Sensor Assembly Is Available for the Fuel Tank {1273}
TH48-E80 Oil/Gas Transmission Speed Sensor (Transmission) - Install
TH48-E80 Oil/Gas Transmission Speed Sensor (Transmission) - Remove
320D and 323D Excavators Machine System Specifications Fasteners - Swing Drive and Final Drive
C7 On-highway Engine Valve Mechanism Cover
C7 On-highway Engine Fuel Injection Lines
Troubleshooting Guide for the Battery Charger{751B} Troubleshooting Guide for the Battery Charger{751B}
TH48-E80 Oil/Gas Transmission Transmission Planetary - Assemble
C6.6 Marine Generator Set Reference Material
C6.6 Marine Generator Set Ignition Keyswitch Circuit and Battery Supply Circuit - Test
C175-16 Locomotive Engine Fuel Filter (Secondary)
C175-16 Locomotive Engine Crankcase Pressure
Specifications for Reusability of the 251-7646 Fan Drive Bracket Assembly on 3500 Machine Engines {1359} Specifications for Reusability of the 251-7646 Fan Drive Bracket Assembly on 3500 Machine Engines {1359}
2008/06/30 An Improved Exhaust Elbow is Now Used {1061}
2008/07/14 A New Type of Main Bearing is Now Used {1202, 1203}
C32 Marine and Auxiliary Marine Engines Air Lines
C9 On-highway Engine Engine Oil Pan
C15 and C18 Petroleum Generator Sets Welding on Engines with Electronic Controls
C9 On-highway Engine Fuel Injection Pump
C7 On-highway Engine Fuel Injection Pump
795F AC and 795F AC XQ Off-Highway Truck Suspension Cylinder Suspension Cylinder (Rear)