TH48-E80 Oil/Gas Transmission Caterpillar


Speed Sensor (Transmission) - Install

Usage:

TH48-E80 FRT

安装程序(输入传感器)

表 1
所需工具    
工具     零件号     零件描述     数量    
A     8T-0065     硅密封胶     1    

注: 清洁度是一项重要的因素。 组装之前,应使用清洗剂彻底清洁所有零件。 让零件风干。 请勿使用抹布擦干零件。 棉绒可能会留在零件上,从而引发故障。 检查所有零件。 如果任何零件磨损或损坏,则应使用新零件进行更换。 尘土及其他污染物可能会损坏精密部件。 组装步骤应在清洁的工作面上进行。 务必盖上部件并采取适当保护措施。




    图 1g01569488

  1. 定位转速传感器 (6) 。 安装护圈和螺栓 (5) 。 连接线束组件 (4) 。 安装扎带 (3) 。



    图 2g01569487

  1. 将工具 (A) 涂抹到密封垫的配合面上。 定位盖组件 (2) 和密封垫。 安装螺栓和垫圈 (1) 。

Caterpillar Information System:

TH48-E80 Oil/Gas Transmission Speed Sensor (Transmission) - Remove
320D and 323D Excavators Machine System Specifications Fasteners - Swing Drive and Final Drive
C7 On-highway Engine Valve Mechanism Cover
C7 On-highway Engine Fuel Injection Lines
Troubleshooting Guide for the Battery Charger{751B} Troubleshooting Guide for the Battery Charger{751B}
TH48-E80 Oil/Gas Transmission Transmission Planetary - Assemble
C6.6 Marine Generator Set Reference Material
TH48-E80 Oil/Gas Transmission Transmission Planetary - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing Cover
C6.6 Marine Generator Set Fuel System Secondary Filter - Replace
2008/06/30 An Improved Damper Is Now Used {1205}
G3516 Power Module Product Lifting
2009/09/28 A New Fuel Level Sensor Assembly Is Available for the Fuel Tank {1273}
C12 Marine Engines Auxiliary Water Pump (Bronze Impeller) - Inspect/Replace
C12 Marine Engines Auxiliary Water Pump (Rubber Impeller) - Inspect/Replace
Procedure to Provide Power for the 266-2296 Instrument Panel Gp {1408, 7451} Procedure to Provide Power for the 266-2296 Instrument Panel Gp {1408, 7451}
C32 Marine and Auxiliary Marine Engines Turbocharger
C6.6 Marine Generator Set Ignition Keyswitch Circuit and Battery Supply Circuit - Test
C175-16 Locomotive Engine Fuel Filter (Secondary)
C175-16 Locomotive Engine Crankcase Pressure
Specifications for Reusability of the 251-7646 Fan Drive Bracket Assembly on 3500 Machine Engines {1359} Specifications for Reusability of the 251-7646 Fan Drive Bracket Assembly on 3500 Machine Engines {1359}
2008/06/30 An Improved Exhaust Elbow is Now Used {1061}
2008/07/14 A New Type of Main Bearing is Now Used {1202, 1203}
C32 Marine and Auxiliary Marine Engines Air Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.