Product Lifting
The power module may need to be lifted by a crane from one position to another position. Two cranes are recommended in order to lift the power module. This will reduce unnecessary stress on the power module. The recommended height for the hook is 6 m (20 ft).
Note: The muffler may be lifted by using a spreader bar.
Show/hide table
 | |
| Illustration 1 | g00728446 |
Caterpillar Information System:
C6.6 Marine Generator Set Fuel System Primary Filter/Water Separator - Drain
C6.6 Marine Generator Set Fuel System Primary Filter (Water Separator) Element - Replace
C9.3 Tier 4 Final Engines Flywheel Housing
795F AC and 795F AC XQ Off-Highway Trucks Front Wheel Oil - Change
C18 Generator Set Engines Engine Top Speed Is Not Obtained
C175-16 Locomotive Engine Measuring Exhaust Temperature
C18 Generator Set Engines Acceleration Is Poor or Throttle Response Is Poor
2008/06/09 An Improved Turbocharger Oil Supply Line is Used {1052, 1307}
C6.6 Marine Generator Set Fuel System - Prime - Single Fuel Filter Assembly
C18 Generator Set Engines Oil Pressure Is Low
C18 Generator Set Engines Engine Overspeeds
3500 Industrial Engines Cylinder Head Valves
2008/06/30 An Improved Damper Is Now Used {1205}
C6.6 Marine Generator Set Fuel System Secondary Filter - Replace
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing Cover
TH48-E80 Oil/Gas Transmission Transmission Planetary - Disassemble
C6.6 Marine Generator Set Reference Material
TH48-E80 Oil/Gas Transmission Transmission Planetary - Assemble
Troubleshooting Guide for the Battery Charger{751B} Troubleshooting Guide for the Battery Charger{751B}
C7 On-highway Engine Fuel Injection Lines
C7 On-highway Engine Valve Mechanism Cover
320D and 323D Excavators Machine System Specifications Fasteners - Swing Drive and Final Drive
TH48-E80 Oil/Gas Transmission Speed Sensor (Transmission) - Remove
TH48-E80 Oil/Gas Transmission Speed Sensor (Transmission) - Install