Suspension Cylinder (Rear)
Show/hide table
图 1 | g01573114 |
(1) 安装轴承,让分离线(断裂平面)对准轴承的水平中心线。
轴承内径 ... 171.45 + 0 − .025 mm (6.75 + 0 − .001 in)
(2) 组装前,用 4C-5592 防粘结润滑剂 润滑 4 个销。
(3) 沿着壳体缠绕盖 (2) 。 定位接缝,使其朝向卡车中心线。
(4) 5M-6214 螺塞 位于每个后悬架油缸的底部。 将润滑脂管装到轴壳体正对的孔中。 塞住外侧孔。
Show/hide table
图 2 | g01573133 |
A-A 视图 |
Show/hide table
图 3 | g01573273 |
B-B 视图 |
(5) 请参阅图 3 以了解润滑孔的位置
Show/hide table
图 4 | g01573274 |
C-C 视图 |
(5) 请参阅图 4 以了解润滑孔的位置
Show/hide table
图 5 | g01573277 |
视图 D-D |
(6) 主阀 178 mm (7/8 in)
- 主阀体的扭矩 ... 13.6 ± .5 N·m (120 ± 4 lb in)
Show/hide table
图 6 | g01573313 |
悬架总成 |
注: 有关充油步骤,请参阅测试与调整, SEHS 9411, "维修非公路用卡车悬架油缸"。
(1) 安装轴承,让分离线(断裂平面)对准轴承的水平中心线。
轴承内径 ... 171.450 + 0 − .025 mm (6.7500 + 0 − .001 in)
(7) 连杆组件的直径 ... 381.08 + .15 − 0 mm (15.0031 + .006 − 0 in)
(8) 油缸组件的缸径 ... 425.5 ± .1 mm (16.75 ± 0.004 in)
(9) 连杆组件的直径 ... 418.82 ± .03 mm (16.489 ± 0.001 in)
(10) 在要密封的密封唇上稍涂润滑剂。
Caterpillar Information System:
C7 On-highway Engine Fuel Injection Pump
C9 On-highway Engine Fuel Injection Pump
C15 and C18 Petroleum Generator Sets Welding on Engines with Electronic Controls
C9 On-highway Engine Engine Oil Pan
C32 Marine and Auxiliary Marine Engines Air Lines
2008/07/14 A New Type of Main Bearing is Now Used {1202, 1203}
2008/06/30 An Improved Exhaust Elbow is Now Used {1061}
Specifications for Reusability of the 251-7646 Fan Drive Bracket Assembly on 3500 Machine Engines {1359} Specifications for Reusability of the 251-7646 Fan Drive Bracket Assembly on 3500 Machine Engines {1359}
C175-16 Locomotive Engine Crankcase Pressure
C175-16 Locomotive Engine Fuel Filter (Secondary)
C6.6 Marine Generator Set Ignition Keyswitch Circuit and Battery Supply Circuit - Test
C32 Marine and Auxiliary Marine Engines Turbocharger
C18 Generator Set Model View Illustrations
2008/11/03 A New Single Notched Piston Skirt Is Now Used {1225}
Replacement of the Double Notch Piston Skirts on C9 Engines{1225} Replacement of the Double Notch Piston Skirts on C9 Engines{1225}
2008/06/30 New Primary Fuel Filters are Now Available {1261, 1263}
2008/07/01 New Primary Fuel Filters and Fuel Filter Bases are Now Available {1261, 1262, 1263}
SR5 Electric Power Generation End Bracket - Remove
SR5 Electric Power Generation End Bracket - Install
SR5 Electric Power Generation Front Bracket - Remove and Install
C6.6 Marine Generator Set Customer Specified Parameters
374F Excavator Machine System Solenoid Valve (Auxiliary Control)
C32 Marine Engine Model View Illustrations
793F and 797F Off-Highway Trucks Braking System Using Caterpillar Electronic Technician to Determine Diagnostic Codes