Water Lines
Show/hide table
 | |
| Illustration 1 | g01526373 |
Right side view | |
(1) Install the hose from the end of the tube at the following distance. ... 40.0 ± 5.0 mm (1.57 ± 0.20 inch)
Note: Orient the clamp (2) so that screw is on top of hose.
(2) Torque for two clamps ... 9.0 ± 0.5 N·m (80 ± 4 lb in)
(3) Apply 5P-3975 Rubber Lubricant to the O-ring seal before assembling the tube into casting.
Note: Orient the clamp (4) so that screw is underneath the hose.
(4) Torque for two clamps ... 9.0 ± 0.5 N·m (80 ± 4 lb in)
Caterpillar Information System:
345D, 349D and 349D2 Excavator Machine System Specifications Hydraulic Fan Drive Lines
2009/05/04 Update to A New Procedure is Now Available for Troubleshooting the Air Conditioning Compressor Protection Module {1802}
C6.6 Marine Generator Set Gauges and Indicators
C13T-TH35 and C15T-TH35 Petroleum Packages Configuration Parameters - Customer Specified Parameters
2008/05/26 An Improved Mounting of the Alternator Belt Guard Is Now Used {7174, 7553}
C6.6 Marine Generator Set Product Lifting
Grounding Design Guide for Electric Power Generation Products {4450, 4459} Grounding Design Guide for Electric Power Generation Products {4450, 4459}
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Pilot Lines
C6.6 Marine Generator Set Emissions Certification Film
C6.6 Marine Generator Set Engine Description
G3520C and G3520E Engines Engine Oil Pump
C15 On-Highway Engine Turbocharger
C15 Petroleum Generator Set Engines Turbocharger
C13, C15, and C18 Generator Set Engines Belt Tightener
319D Excavator Machine System Specifications Pilot Lines - Pump Control and Shuttle Valve
C6.6 Marine Generator Set System Overview
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Pilot Lines
C6.6 Marine Generator Set Glossary
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Front Lines
C6.6 Marine Generator Set Indicator Lamps
349F and 352F Excavators Machine System Specifications Relief Valve (Line)
C13T-TH35 and C15T-TH35 Petroleum Packages Monitoring System - Dash Lamps and Controls for the Aftertreatment Regeneration Device (ARD)
C6.6 Marine Generator Set Control Panel
345D, 349D and 349D2 Excavator Machine System Specifications Check Valve - Auxiliary Circuit