Fuel Filter Base - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position fuel filter base (8) on the engine.
- Install the washers and bolts (3).
- Connect hose assembly (6).
- Connect tube assemblies (5) and (1).
- Install new fuel filter (7). Follow the instructions on the fuel filter.
- Connect harness assemblies (4) and (2).
Show/hide table
Illustration 1 | g01452218 |
Caterpillar Information System:
C11 and C13 Petroleum Engines Fuel Filter Base - Remove
2008/02/11 The Dipstick for Certain OEM Transmissions Has Been Improved {3005, 3081}
C11 and C13 Petroleum Engines Fuel Priming Pump - Remove and Install
C11 and C13 Petroleum Engines Engine Oil Pan
C11 and C13 Petroleum Engines Engine Oil Pan
Rerate Software Causes the ECM to Lock Up After Flashing{1901} Rerate Software Causes the ECM to Lock Up After Flashing{1901}
C175-16 and C175-20 Generator Set Engines Diagnostic Trouble Codes
2008/02/11 New AccuGrade ® Software is Now Available {7220, 7620}
C11, C13, and C15 On-highway Engines Engine Oil Level Gauge - Calibrate
C175-16 and C175-20 Generator Set Engines Event Codes
Failures of a Jacket Water Pump on Some G3500 Engines{1350, 1361} Failures of a Jacket Water Pump on Some G3500 Engines{1350, 1361}
Reuse and Salvage for Crankshafts {0674, 1202} Reuse and Salvage for Crankshafts {0674, 1202}
C11 and C13 Petroleum Engines Turbocharger - Remove
C7 Petroleum Engines Cooling System - Check - Overheating
2008/03/01 A New Spring Guide for the Camshaft Lifter is Used {1209}
2008/04/01 New Mounting for the Temperature Sensor Is Now Used {108B, 108E, 108M}
C11 and C13 Petroleum Engines Turbocharger - Install
2008/05/19 Improved Oil Return Lines for the Turbocharger are Used {1052, 1307}
Seizure of Thermocouple Threads in Some G3500C and G3500E Exhaust Manifolds{1408, 1900, 7498} Seizure of Thermocouple Threads in Some G3500C and G3500E Exhaust Manifolds{1408, 1900, 7498}
C11 and C13 Petroleum Engines Exhaust Manifold - Remove and Install
C11 and C13 Petroleum Engines Engine Oil Cooler - Remove
Downloading Programs to Power Generation Equipment with the Execloader Software{7620} Downloading Programs to Power Generation Equipment with the Execloader Software{7620}
C18 Industrial Engines Speed Sensor - Clean/Inspect
C11 and C13 Petroleum Engines Engine Oil Cooler - Install