Fuel Filter Base - Remove
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 185-3630 | Strap Wrench | 1 |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn the fuel supply to the OFF position.
Show/hide table
Illustration 1 g01452218 - Disconnect harness assemblies (2) and (4).
- Use Tooling (A) in order to remove fuel filter (7) from fuel filter base (8).
- Disconnect tube assemblies (1) and (5).
- Disconnect hose assembly (6).
- Remove bolts (3), the washers, and fuel filter base (8).
Caterpillar Information System:
2008/02/11 The Dipstick for Certain OEM Transmissions Has Been Improved {3005, 3081}
C11 and C13 Petroleum Engines Fuel Priming Pump - Remove and Install
C11 and C13 Petroleum Engines Engine Oil Pan
C11 and C13 Petroleum Engines Engine Oil Pan
Rerate Software Causes the ECM to Lock Up After Flashing{1901} Rerate Software Causes the ECM to Lock Up After Flashing{1901}
C175-16 and C175-20 Generator Set Engines Diagnostic Trouble Codes
2008/02/11 New AccuGrade ® Software is Now Available {7220, 7620}
C11, C13, and C15 On-highway Engines Engine Oil Level Gauge - Calibrate
C175-16 and C175-20 Generator Set Engines Event Codes
Failures of a Jacket Water Pump on Some G3500 Engines{1350, 1361} Failures of a Jacket Water Pump on Some G3500 Engines{1350, 1361}
Reuse and Salvage for Crankshafts {0674, 1202} Reuse and Salvage for Crankshafts {0674, 1202}
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C11 and C13 Petroleum Engines Fuel Filter Base - Install
C11 and C13 Petroleum Engines Turbocharger - Remove
C7 Petroleum Engines Cooling System - Check - Overheating
2008/03/01 A New Spring Guide for the Camshaft Lifter is Used {1209}
2008/04/01 New Mounting for the Temperature Sensor Is Now Used {108B, 108E, 108M}
C11 and C13 Petroleum Engines Turbocharger - Install
2008/05/19 Improved Oil Return Lines for the Turbocharger are Used {1052, 1307}
Seizure of Thermocouple Threads in Some G3500C and G3500E Exhaust Manifolds{1408, 1900, 7498} Seizure of Thermocouple Threads in Some G3500C and G3500E Exhaust Manifolds{1408, 1900, 7498}
C11 and C13 Petroleum Engines Exhaust Manifold - Remove and Install
C11 and C13 Petroleum Engines Engine Oil Cooler - Remove
Downloading Programs to Power Generation Equipment with the Execloader Software{7620} Downloading Programs to Power Generation Equipment with the Execloader Software{7620}
C18 Industrial Engines Speed Sensor - Clean/Inspect