Turbocharger - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 5P-3931 | Anti-Seize Compound | - |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Apply Tooling (A) to the turbocharger mounting studs on the exhaust manifold.
- Attach a suitable lifting device to turbocharger (2). The weight of turbocharger (2) is approximately
23 kg (50 lb) . Position the gasket and turbocharger (2) on the engine.Note: Discard the nuts after use. Use new nuts for installation.
- Install nuts (1).
- Connect tube assembly (4).
- Connect hose assembly (3).
Show/hide table
Illustration 1 | g01452346 |
Caterpillar Information System:
2008/04/01 New Mounting for the Temperature Sensor Is Now Used {108B, 108E, 108M}
2008/03/01 A New Spring Guide for the Camshaft Lifter is Used {1209}
C7 Petroleum Engines Cooling System - Check - Overheating
C11 and C13 Petroleum Engines Turbocharger - Remove
C11 and C13 Petroleum Engines Fuel Filter Base - Install
C11 and C13 Petroleum Engines Fuel Filter Base - Remove
2008/02/11 The Dipstick for Certain OEM Transmissions Has Been Improved {3005, 3081}
C11 and C13 Petroleum Engines Fuel Priming Pump - Remove and Install
C11 and C13 Petroleum Engines Engine Oil Pan
C11 and C13 Petroleum Engines Engine Oil Pan
Rerate Software Causes the ECM to Lock Up After Flashing{1901} Rerate Software Causes the ECM to Lock Up After Flashing{1901}
C175-16 and C175-20 Generator Set Engines Diagnostic Trouble Codes
2008/05/19 Improved Oil Return Lines for the Turbocharger are Used {1052, 1307}
Seizure of Thermocouple Threads in Some G3500C and G3500E Exhaust Manifolds{1408, 1900, 7498} Seizure of Thermocouple Threads in Some G3500C and G3500E Exhaust Manifolds{1408, 1900, 7498}
C11 and C13 Petroleum Engines Exhaust Manifold - Remove and Install
C11 and C13 Petroleum Engines Engine Oil Cooler - Remove
Downloading Programs to Power Generation Equipment with the Execloader Software{7620} Downloading Programs to Power Generation Equipment with the Execloader Software{7620}
C18 Industrial Engines Speed Sensor - Clean/Inspect
C11 and C13 Petroleum Engines Engine Oil Cooler - Install
2008/04/14 New Processes Improve Registration of Product Link {7338, 7606}
A New Purge Pump and Service Pack are Now Used{107P} A New Purge Pump and Service Pack are Now Used{107P}
C11 and C13 Petroleum Engines Water Pump - Remove
2008/02/11 Use of Remanufactured Injectors in Marine Engines {1290}
2008/04/21 Improved Exhaust Risers and Brackets are Now Used {1059}