Engine Design
Show/hide table
Illustration 1 | g01193927 |
(A) Exhaust valves
(B) Inlet valves |
Bore ...
Stroke ...
Displacement ...
Cylinder arrangement ... In-line
Valves per cylinder ... 4
Type of combustion ... Direct injection
Valve lash with engine stopped (cold)
- Inlet ...
0.38 ± 0.08 mm (0.015 ± 0.003 inch) - Exhaust ...
0.64 ± 0.08 mm (0.025 ± 0.003 inch) - Exhaust ...
Note: The front end of the engine is opposite of the flywheel end of the engine. The left side and the right side of the engine are viewed from the flywheel end of the engine. The no. 1 cylinder is the front cylinder.
Crankshaft rotation direction (view from the flywheel end) ... Counterclockwise
Firing order (injection sequence) ... 1, 5, 3, 6, 2, 4
Caterpillar Information System:
325D and 329D Excavators Machine System Specifications Drain Line (Muffler)
G3600 Engines Component Location
C18 Petroleum Generator Sets Refill Capacities and Recommendations
G3600 Engines Oil Pressure Is High
2008/01/28 A New Adapter Assembly is Used with the Turbocharger Compressor Outlet Pressure Sensor {1917}
C7 Petroleum Engines Fuel Priming Pump
345D, 349D and 349D2 Excavator Machine System Specifications Upper Frame
C7 Petroleum Engines Refrigerant Compressor
2008/02/18 Procedure for the Return of Marine Engine Parts {1000}
C11 and C13 Petroleum Engines Belt Tensioner
C7 Petroleum Engines Electronic Unit Injector - Test
3176C and 3196 Marine Engines Aftercooler Core - Clean/Test
C9 Petroleum Engines Engine Oil Pan
G3600 Engines Electrical Connectors
C3.3 Industrial Engine Accessory Drive - Remove
C3.3 Industrial Engine Accessory Drive - Disassemble
C3.3 Industrial Engine Accessory Drive - Assemble
C3.3 Industrial Engine Accessory Drive - Install
SR5 Electric Power Generation Generator Fan - Remove and Install
G3600 Engines Electronic Service Tool Does Not Communicate
2009/08/03 Procedure for Providing Constant Power to the Electronic Control Module (ECM) {1408, 1901}
G3600 Engines ECM - Replace
G3600 Engines Air/Fuel Pressure Module - Calibrate
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Alarm Module Control - Adjust