C175-16 Locomotive Engine Caterpillar


Fuel Injector - Replace

Usage:

C175-16 3B9

------ WARNING! ------

Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.



NOTICE

Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over any disconnected fuel system components.



NOTICE

If a fuel injector is suspected of operating outside of normal parameters it should be removed by a qualified technician. The suspect fuel injector should be taken to an authorised agent for inspection.


Refer to Disassembly and Assembly , M0067480 for the removal and installation procedures.

Caterpillar Information System:

D8T Track-Type Tractor Differential Steering System
D6 Track-Type Tractor Machine Systems Piston Pump (Steering) - Remove and Install
C175-16 Locomotive Engine Diesel Exhaust Fluid System - Inspect/Clean
C175-16 Locomotive Engine Crankshaft Vibration Damper seals - Replace
C175-16 Locomotive Engine Crankshaft Vibration Damper Bolts - Inspect
C175-16 Locomotive Engine Diesel Exhaust Fluid Pump Check Valves - Replace
C175-16 Locomotive Engine Diesel Exhaust Fluid Pump Diaphragm - Replace
Installation of the 567-0669 Coupler Lines Gp on Certain Wheel Loaders {5057, 5133, 6129} Installation of the 567-0669 Coupler Lines Gp on Certain Wheel Loaders {5057, 5133, 6129}
D6 Track-Type Tractor Machine Systems Hydraulic Tank - Assemble
D6 Track-Type Tractor Winch Wire Rope - Install - If Equipped
D6 Track-Type Tractor Undercarriage - Clean
D6 Track-Type Tractor Fuel System - Prime
D11 Track-Type Tractor Power Train System Screens - Clean
Cat® Command for Dozing, Remote Control Operator Station Operator Station Action Alarm - Check
D6 XE Track-Type Tractor Power Train Electric Drive Wiring - Remove and Install
D6 Track-Type Tractor Power Train System Oil And Screens - Change/Clean - XE Electric Drive
Rework Procedure for Joystick Mounting Bracket on Certain MD6250 and MD6310 Rotary Drills {1408, 5059, 5063, 5705} Rework Procedure for Joystick Mounting Bracket on Certain MD6250 and MD6310 Rotary Drills {1408, 5059, 5063, 5705}
D6 Track-Type Tractor Machine Systems Winch - Remove and Install
Check the Rear Axle Drain Plug on AD60 Underground Articulated Trucks {3260} Check the Rear Axle Drain Plug on AD60 Underground Articulated Trucks {3260}
903 D Wheel Loader Power Train Tire and Rim - Remove and Install
950 GC Wheel Loader Additional Messages - Japan Only Films
Updated Cylinder Block Rear Housing Gasket is Now Used on Certain Cat® Engines {1166} Updated Cylinder Block Rear Housing Gasket is Now Used on Certain Cat® Engines {1166}
950 GC Wheel Loader Safety Messages - Japan Only Films
D6 XE Track-Type Tractor Power Train Power Inverter - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.