Relief Valve (Torque Converter Inlet) - Assemble
组装步骤
Show/hide table
需要的工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | -     | 导向螺栓 3/8-16 X 14 in     |
2     |
- | 螺母 3/8-16     |
2     | |
- | 垫圈     | 2     |
- 安装安全滑阀 (6) 。 安装 O 形密封圈 (5) 。
Show/hide table
图 1 | g01446289 |
- 安装弹簧 (4) 。 将板 (3) 装到工具 (A) 上。 将工具 (A) 装入安全阀并拧紧螺母。
Show/hide table
图 2 | g01446252 |
Show/hide table
图 3 | g01446251 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 一旦板 (3) 落座,拆下工具 (A) 的一个零件并安装一颗螺栓 (2) 。 拆下工具 (A) 并安装剩余的螺栓 (2) 。 拧紧螺栓 (2) 至扭矩 47 ± 9 N·m (35 ± 7 lb ft)。
Show/hide table
图 4 | g01446193 |
Show/hide table
图 5 | g01446192 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 安装 O 形密封圈 (1) 。
Show/hide table
图 6 | g01446172 |
End By: 安装安全阀。 请参阅 拆解和组装, "安全阀(变矩器进口)- 安装"。
Caterpillar Information System:
TH55-E70 and TH55-E90 Petroleum Transmissions Relief Valve (Torque Converter Inlet) - Disassemble
TH55-E70 and TH55-E90 Petroleum Transmissions Relief Valve (Torque Converter Inlet) - Remove
G3600 Engines Electrohydraulic System Oil Pressure Is Low
349F and 352F Excavators Machine System Specifications Bucket Cylinder Lines
C9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Stick Cylinder
G3600 Engines Detonation Occurrence
G3600 Engines Cylinder Is Noisy
3516C Generator Set Engine Power Is Intermittently Low or Power Cutout Is Intermittent
3512C Engine and 785D Off-Highway Truck/Tractors Engine Shutdown Is Intermittent
G3600 Engines Crankcase Pressure Is High
G3600 Engines Coolant Temperature Is Low
TH55-E70 and TH55-E90 Petroleum Transmissions Relief Valve (Torque Converter Inlet) - Install
G3600 Engines Engine Cranks but Does Not Start
G3600 Engines Engine Has Mechanical Noise (Knock)
G3600 Engines Engine Misfires, Runs Rough or Is Unstable
C7 Petroleum Engine Zinc Rods - Inspect/Replace - If Equipped with an Aftercooler that is Cooled by Sea Water
C15 and C18 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Remove
C15 and C18 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Install
G3600 Engines Engine Overcrank Occurrence
G3600 Engines Engine Overloads
G3600 Engines Engine Overspeeds
G3600 Engines Engine Shutdown Occurrence
G3600 Engines Engine Shutdown Is Intermittent