Bucket Cylinder Lines
Show/hide table
| 图 1 | g01446082 |
(A) 从安装销中心线到支撑组件 (1) 的距离 ... 235.0 ± 3.0 mm (9.25 ± 0.12 in)
(2) 四条螺栓的扭矩 ... 32 ± 6 N·m (24 ± 4 lb ft)
(C) 支撑组件 (3) 的方向 ... 30 ± 3 度
Caterpillar Information System:
C9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Stick Cylinder
G3600 Engines Detonation Occurrence
G3600 Engines Cylinder Is Noisy
3516C Generator Set Engine Power Is Intermittently Low or Power Cutout Is Intermittent
3512C Engine and 785D Off-Highway Truck/Tractors Engine Shutdown Is Intermittent
G3600 Engines Crankcase Pressure Is High
G3600 Engines Coolant Temperature Is Low
2008/01/01 Update on the Hose for the Wastegate {1052, 1053}
2008/01/07 Update on the Hose for the Wastegate {1052, 1053}
3516C Generator Set Engine Engine Misfires, Runs Rough or Is Unstable
Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317} Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317}
G3600 Engines Electrohydraulic System Oil Pressure Is Low
TH55-E70 and TH55-E90 Petroleum Transmissions Relief Valve (Torque Converter Inlet) - Remove
TH55-E70 and TH55-E90 Petroleum Transmissions Relief Valve (Torque Converter Inlet) - Disassemble
TH55-E70 and TH55-E90 Petroleum Transmissions Relief Valve (Torque Converter Inlet) - Assemble
TH55-E70 and TH55-E90 Petroleum Transmissions Relief Valve (Torque Converter Inlet) - Install
G3600 Engines Engine Cranks but Does Not Start
G3600 Engines Engine Has Mechanical Noise (Knock)
G3600 Engines Engine Misfires, Runs Rough or Is Unstable
C7 Petroleum Engine Zinc Rods - Inspect/Replace - If Equipped with an Aftercooler that is Cooled by Sea Water
C15 and C18 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Remove
C15 and C18 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Install
G3600 Engines Engine Overcrank Occurrence