1987/09/28 Caterpillar


New Special Instruction, "Using the PEEC Screen Map(s)" {0374}

Usage:


3406B (PEEC) Truck Engines

Reference: Special Instruction, Form SEHS8742, "Using the Electronic Control Analyzer Programmer (ECAP)." Special Instruction, Form SEHS8741, "Using the 8C5919 3406B (PEEC) Service Program Module."

A new Special Instruction, Form SEHS8747, "Using the PEEC Screen Map(s)," is available. This special instruction shows the display screens that are available to the user of the 8T8697 Electronic Control Analyzer Programmer (ECAP) with the 8C5919 3406B (PEEC) Service Program Module. The instruction acts as a "road map" to the various display screens and the functions available from each screen. By showing the contents of each screen, as seen on the ECAP service tool, this instruction provides a quick, visual guide of how to proceed to the desired function.

The new special instruction may be ordered through normal literature ordering channels.

Caterpillar Information System:

1987/09/28 New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28 Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28 Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28 Thinner Piston Retaining Nuts Are Used In Hydraulic Cylinders {7562}
1987/09/21 New Timing Gear Housing Used In Front Housing Groups To Help Prevent Oil Leaks{1162,1166}
1987/09/21 Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21 New Hydraulic Steering Mounting Group Available{4306}
1987/09/21 New Alternator Used In Charging Alternator Groups{1405}
1987/09/21 New Adapters Available For Metric Test Ports So That SAE Connectors Can Be Used{0784}
1987/09/14 Oil Flow Increased For Inlet Valve Lubricator {1105}
1987/09/14 New Digital Pyrometer Which Incorporates High Exhaust Temperature Alarm Now Used {1606,7412,7450,7466}
1987/09/14 New Piston Cooling Jets Used {1213,1214}
1987/09/28 Engine Oil Coolers Have Rubber End Sheets In Place Of Brazed Sheets {1300,1378}
1987/10/05 Individual Parts Of Caterpillar Hydraulic Gear Pumps Are Available{5073}
1987/10/05 New Product Support Information Available For Electric Power Generation (EPG){4450,0374}
1987/10/05 Replacement Thermostats Available For Jacket Water Heaters{1383}
1987/10/12 Piston And Camshaft Changes{1214,1210,1200}
1987/10/19 Check Plastic Water Sleeve If Engine Experiences Severe Overheating{1380,1350}
1987/10/26 Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/11/02 Improved Duo-Cone Seal Installers Available{0600,7561}
1987/11/02 Four New Sizes Of Three-Jaw Pullers Available{0700,4050}
1987/11/02 Results Of High Speed And/Or Overspeeding Of 3406B Truck Engines{1105,1209,1210,1214}
1987/11/02 4N3311 Radiator Cap Has Improved Sealing{1382}
1987/11/09 New 1U6313 Adapter Available For Use With Nitrogen Tire Inflation Group{0600,0730}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.