New Adapters Available For Metric Test Ports So That SAE Connectors Can Be Used{0784}
Usage:
Several new adapters are available for use with hydraulic components that have metric test ports. The adapters convert the metric DIN 3852 ports to Number 6 SAE ports. A face seal must be used with each adapter. These adapters are available for the most common test ports used in hydraulic components built to metric standards. The chart lists the adapter part numbers and size along with the associated face seal part number.
Caterpillar Information System:
1987/09/14 Oil Flow Increased For Inlet Valve Lubricator {1105}
1987/09/14 New Digital Pyrometer Which Incorporates High Exhaust Temperature Alarm Now Used {1606,7412,7450,7466}
1987/09/14 New Piston Cooling Jets Used {1213,1214}
1987/09/14 Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14 New Turbochargers Have Several Improvements {1053,1066}
1987/09/14 Remanufactured 3208T Economy Truck Engine Available {1000}
1987/09/14 Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14 Remanufactured Air Conditioner Compressor Available {1802}
1987/09/07 New O-Ring Seals Used In Water Lines{1350}
1987/09/07 Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07 Use The Marketing Publications Information Feedback System{0374}
1987/09/07 Improved Warranty For Remanufactured Parts And Components{7754}
1987/09/21 New Alternator Used In Charging Alternator Groups{1405}
1987/09/21 New Hydraulic Steering Mounting Group Available{4306}
1987/09/21 Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21 New Timing Gear Housing Used In Front Housing Groups To Help Prevent Oil Leaks{1162,1166}
1987/09/28 Thinner Piston Retaining Nuts Are Used In Hydraulic Cylinders {7562}
1987/09/28 Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28 Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28 New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28 New Special Instruction, "Using the PEEC Screen Map(s)" {0374}
1987/09/28 Engine Oil Coolers Have Rubber End Sheets In Place Of Brazed Sheets {1300,1378}
1987/10/05 Individual Parts Of Caterpillar Hydraulic Gear Pumps Are Available{5073}
1987/10/05 New Product Support Information Available For Electric Power Generation (EPG){4450,0374}