1987/09/07 Caterpillar


Use The Marketing Publications Information Feedback System{0374}

Usage:


There may be instances when the user of service literature discovers discrepancies, omissions, etc. in publications. The Publications Division of the Marketing Support Department provides a method that enables you to report these discoveries. This method is the "Marketing Publications Information Feedback System."

This system consists of a preaddressed post card that is simple and easy to use. The reverse side of this card lists the literature that is the responsibility of the Publications Division. Space is provided for you to enter specific information and a brief explanation of the discrepancy or omission.

The information you supply is used to make additions and/or corrections, as necessary, to update our publications. Be sure to indicate the type of publication by checking the appropriate box. Enter the following information:

...Machine or engine model number.

...Product Identification Number (PIN) or Serial Number.

...Engine arrangement number (if applicable).

...Form and page numbers.

...Title and issue date.

...Your name and address.

Once your feedback card is received, it will be recorded and forwarded to the appropriate area. A response will be made informing you of the action we plan to take.

Most changes will usually appear first in the microfiche libraries, if they exist. Generally, changes on paper will be made at the time a reprint is required. If necessary, a Service Magazine article or supplement will be published. Do not be discouraged if some changes take longer.

The "Marketing Publications Information Feedback System" form number is 01-083783-04 (0907). To order a supply, you must use media number 00083783. Place your order in the same manner as you would for any other service literature.

Caterpillar encourages all product support personnel to make use of this feedback system. Your input is important.

Caterpillar Information System:

1987/09/07 Improved Warranty For Remanufactured Parts And Components{7754}
1987/08/31 Metal Protectors Replace Plastic Protectors On Head Studs {1100}
1987/08/31 Recommendations For Preventing Cooling System Damage {1201}
1987/08/31 Improved Clutch Piston And Retraction Pins Available {3302}
1987/08/24 New 8T8726, 8T8694 And 8T8695 Adapter Cable Assemblies Available{0600}
1987/08/24 New 8T5282 Programmable Electronic Engine Control Digital Diagnostic Tool Group (PEEC DDT) Available{0600}
1987/08/24 New 8T8697 Electronic Control Analyzer Programmer (ECAP), 8C5919 Electronic (ECAP PEEC) Conversion Group and 8T5275 Adapter Cable Assembly (T-Harness Cable) Available{0600}
1987/08/24 Dynamic Timing Charts Available For Most Popular 3208 And 3406 Truck Engine Ratings{1272}
1987/08/24 Additional Engine Tilt Installation Angles And Engine Dipstick Markings{1326}
1987/08/24 Engine Oil Refill Capacity Decreased{1213,1326}
1987/08/24 Improved High Temperature Seals Available{1252,1120}
1987/08/24 More Accurate And Easier Method To Adjust 8T1815 Or 6L5438 Main Shaft Bearing{3306,3351}
1987/09/07 Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07 New O-Ring Seals Used In Water Lines{1350}
1987/09/14 Remanufactured Air Conditioner Compressor Available {1802}
1987/09/14 Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14 Remanufactured 3208T Economy Truck Engine Available {1000}
1987/09/14 New Turbochargers Have Several Improvements {1053,1066}
1987/09/14 Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14 New Piston Cooling Jets Used {1213,1214}
1987/09/14 New Digital Pyrometer Which Incorporates High Exhaust Temperature Alarm Now Used {1606,7412,7450,7466}
1987/09/14 Oil Flow Increased For Inlet Valve Lubricator {1105}
1987/09/21 New Adapters Available For Metric Test Ports So That SAE Connectors Can Be Used{0784}
1987/09/21 New Alternator Used In Charging Alternator Groups{1405}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.