1987/11/09 Caterpillar


New 1U6313 Adapter Available For Use With Nitrogen Tire Inflation Group{0600,0730}

Usage:


The new 1U6313 Adapter is available for use with the 6V4040 Nitrogen Tire Inflation Group. The adapter can be used to allow a vehicle to fill its tires from its own air system. The 1U6313 Adapter has 0.965 mm-14 NGO-RH internal threads on one end and 1/4"-18 NPTF internal threads on the other end. The end with 0.965-14 NGO-RH internal threads can be connected to the 6V4037 Regulator in the 6V4040 Nitrogen Tire Inflation Group. The 1/4"-18 NPTF internal threads on the other end of the adapter can be used for attaching the pipe fittings required to get into the vehicle's air system.

Caterpillar Information System:

1987/11/02 4N3311 Radiator Cap Has Improved Sealing{1382}
1987/11/02 Results Of High Speed And/Or Overspeeding Of 3406B Truck Engines{1105,1209,1210,1214}
1987/11/02 Four New Sizes Of Three-Jaw Pullers Available{0700,4050}
1987/11/02 Improved Duo-Cone Seal Installers Available{0600,7561}
1987/10/26 Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/19 Check Plastic Water Sleeve If Engine Experiences Severe Overheating{1380,1350}
1987/10/12 Piston And Camshaft Changes{1214,1210,1200}
1987/10/05 Replacement Thermostats Available For Jacket Water Heaters{1383}
1987/10/05 New Product Support Information Available For Electric Power Generation (EPG){4450,0374}
1987/10/05 Individual Parts Of Caterpillar Hydraulic Gear Pumps Are Available{5073}
1987/09/28 Engine Oil Coolers Have Rubber End Sheets In Place Of Brazed Sheets {1300,1378}
1987/09/28 New Special Instruction, "Using the PEEC Screen Map(s)" {0374}
1987/11/09 Parts Information For VR3 Automatic Voltage Regulators{4467}
1987/11/16 New Service Tools Available{0600}
1987/11/16 New Air Powered Scraper Available For Gasket Removal{0600}
1987/11/16 New 8C9705 12 Volt Converter Available To Power The 8T8697 Electronic Control Analyzer Programmer (ECAP){0600}
1987/11/16 New Water Temperature Regulator Helps Prevent Overcooling{1355}
1987/11/23 Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23 Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23 Intake Valve Seals Used{1105,1300}
1987/11/23 Additional Parts Required For Installation Of C-336 Jacobs® Engine Brake{1119,1209,1210}
1987/11/23 Connections For Water Conditioner Lines Changed{1350}
1987/11/23 Ring Retainer And New O-Ring Seal Used In The BrakeSaver Engine Oil Lines Group{1159}
1987/11/23 Improved Mounting Hardware For Electronic Control Group{1250,1259}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.