Use the Turbocharger Seal Kit to Repair Exhaust Leaks {1052, 1053, 7555}
- Engine:
- 3516B (S/N: 4BW1-UP; S2X1-UP; S2Y1-UP)
A seal kit is available for the following turbochargers:
- 164-7330 Turbocharger Gp
- 178-3650 Turbocharger Gp
- 183-8818 Turbocharger Gp
- 196-9547 Turbocharger Gp
- 196-9548 Turbocharger Gp
- 196-9549 Turbocharger Gp
- 197-0753 Turbocharger Gp
- 226-0134 Turbocharger Gp
Use the 165-6674 Turbocharger Seal Kit in order to repair exhaust leaks around the cartridge assembly.
Follow the correct assembly procedure when the seal kit is installed.
Assembly Procedure
- Assemble the bearing housing (cartridge) and the turbocharger turbine housing. Ensure that there is a tight fit between the two housings. The housings must be properly aligned in order to prevent distortion to the v-band clamp.
- Install the v-band clamp and tighten the clamp to the following torque:
Torque ... 60 N·m (44 lb ft)
- Tap around the outside diameter of the cover with a soft hammer and tighten the v-band clamp again to the following torque:
Torque ... 60 N·m (44 lb ft)
Show/hide table
Illustration 1 | g01621885 |
Exploded view of turbocharger (typical example) (1) O-Ring seal (ABB part number HZTL414040P0029) (2) O-Ring seal (ABB part number HZTL414042P0183) (3) Bolt (ABB part number HZTL431157P0001) (4) Gasket (ABB part number HZTL431319P0001) (5) Gasket (ABB part number HZTL431319P0004) not visible (6) V-Band clamp (ABB part number HZTL317821R0261) |
Caterpillar Information System:
797F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication) - Disassemble
3176C, 3406E and 3456 Industrial Engines Data Link - Test
2007/11/19 A New Water Seal and a New Spacer are Used for the Water Pumps {1361, 1361}
G3600 Engines Sensor Supply - Test
3406E and C15 Marine Engines Engine Oil Pan
3406E and C15 Marine Engines Engine Oil Pan
C13 and C15 On-Highway Engines Configuration Parameters - Customer Specified Parameters
Procedure to Prevent or Correct Multi-Station Control System (MSCS) Throttle Issues{1901, 1915, 3065, 5910} Procedure to Prevent or Correct Multi-Station Control System (MSCS) Throttle Issues{1901, 1915, 3065, 5910}
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Event Codes
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Air Shutoff - Test
G3600 Engines Sensor Signal (Analog, Passive) - Test
3406E and C15 Marine Engines Camshaft
3406E and C15 Marine Engines Heat Exchanger
797F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication) - Assemble
797F Off-Highway Truck Power Train Relief Valve (Transmission Main) - Disassemble
2007/11/01 A New Purge Pump and Service Pack are Now Used {107P, 1408, 1900}
2007/12/24 Combustion Inserts in the Cylinder Head {1100}
G3520B Engines Air Lines
2007/12/24 A New More Rugged Sump Pump Is Now Used {1324}
797F Off-Highway Truck Power Train Relief Valve (Transmission Main) - Assemble
797F Off-Highway Truck Power Train Screen (Transmission Scavenge) - Remove and Install
797F Off-Highway Truck Power Train Transmission Hydraulic Control - Remove
C9.3 Marine Auxiliary Engines Turbocharger - Inspect
3176C, 3406E and 3456 Industrial Engines Air Shutoff - Test