Relief Valve (Transmission Main) - Disassemble
拆解步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1P-1853 | 挡圈钳 | 1 |
开始:
- 拆下主安全阀。
- 将接头 (2) 和 O 形密封圈从安全阀 (1) 上拆下。
Show/hide table
 | |
| 图 1 | g01431844 |
- 拆下塞 (3) 。
Show/hide table
 | |
| 图 2 | g01431848 |
- 将 O 形密封圈 (4) 从螺塞 (3) 上拆下。
Show/hide table
 | |
| 图 3 | g01431853 |
- 将缓动阀 (5) 从安全阀 (1) 上拆下。
Show/hide table
 | |
| 图 4 | g01431857 |
- 拆下螺栓 (6) 和垫圈以拆下调整盖 (7) 。
Show/hide table
 | |
| 图 5 | g01431947 |
- 从调整盖 (7) 上拆下 O 形密封圈 (8) 。
Show/hide table
 | |
| 图 6 | g01431949 |
- 拆下螺栓 (9) 和垫圈。 将盖 (10) 从安全阀 (1) 上拆下。
Show/hide table
 | |
| 图 7 | g01431957 |
Show/hide table
 |
被弹簧力爆出的零件击中，会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序，并使用所有建议的工具以释放弹簧力。 |
- 为便于安装，记录螺栓 (11) 的长度。 如有必要，将螺栓 (11) 从盖 (10) 上拆下。
Show/hide table
 | |
| 图 8 | g01431958 |
- 将 O 形密封圈 (12) 从安全阀 (1) 上拆下。
Show/hide table
 | |
| 图 9 | g01431960 |
- 拆下止动块 (14) 和弹簧 (13) 。
Show/hide table
 | |
| 图 10 | g01431963 |
- 从安全阀 (1) 上拆下滑阀 (15) 。
Show/hide table
 | |
| 图 11 | g01431971 |
- 利用工具 (A) 将挡圈 (16) 从滑阀 (15) 上拆下。
Show/hide table
 | |
| 图 12 | g01431978 |
Show/hide table
|
被弹簧力爆出的零件击中，会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序，并使用所有建议的工具以释放弹簧力。 |
- 从滑阀 (15) 上拆下挡圈 (19) 、弹簧 (18) 和钢珠 (17) 。
Show/hide table
 | |
| 图 13 | g01431992 |
- 将节流孔螺塞 (20) 从滑阀 (15) 上拆下。
Show/hide table
 | |
| 图 14 | g01432001 |
Caterpillar Information System:
797F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication) - Assemble
3406E and C15 Marine Engines Heat Exchanger
2007/11/12 Use the Turbocharger Seal Kit to Repair Exhaust Leaks {1052, 1053, 7555}
797F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication) - Disassemble
3176C, 3406E and 3456 Industrial Engines Data Link - Test
2007/11/19 A New Water Seal and a New Spacer are Used for the Water Pumps {1361, 1361}
G3600 Engines Sensor Supply - Test
3406E and C15 Marine Engines Engine Oil Pan
3406E and C15 Marine Engines Engine Oil Pan
C13 and C15 On-Highway Engines Configuration Parameters - Customer Specified Parameters
Procedure to Prevent or Correct Multi-Station Control System (MSCS) Throttle Issues{1901, 1915, 3065, 5910} Procedure to Prevent or Correct Multi-Station Control System (MSCS) Throttle Issues{1901, 1915, 3065, 5910}
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Event Codes
2007/11/01 A New Purge Pump and Service Pack are Now Used {107P, 1408, 1900}
2007/12/24 Combustion Inserts in the Cylinder Head {1100}
G3520B Engines Air Lines
2007/12/24 A New More Rugged Sump Pump Is Now Used {1324}
797F Off-Highway Truck Power Train Relief Valve (Transmission Main) - Assemble
797F Off-Highway Truck Power Train Screen (Transmission Scavenge) - Remove and Install
797F Off-Highway Truck Power Train Transmission Hydraulic Control - Remove
C9.3 Marine Auxiliary Engines Turbocharger - Inspect
3176C, 3406E and 3456 Industrial Engines Air Shutoff - Test
G3520B Engines Engine Oil Pressure Sensor
C9 Petroleum Engines Electronic Unit Injector Sleeve - Remove
C9 Petroleum Engines Electronic Unit Injector - Remove